HELGI HI0378SDI Manual

HELGI AV forlænger HI0378SDI

Læs gratis den danske manual til HELGI HI0378SDI (6 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om HELGI HI0378SDI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Thank you for purchasing this product. For optimum performance and safety, please read the

instructions carefully and keep the manual for future referency.

Important safety notice

Please read below safety instructions carefully before installation and operation:

 Please pay attention to all the warnings and hints on this device.

 Do not expose this unit to rain, moisture and liquid.

 Do not put any stuff into the device.

 Do not repair or open this device without professional people’ s guidance.

 Make sure good ventilation openings to avoid product overheating damage.

 Shut off power and make sure environment is safe before installation.

 Do not plug-in/out the network cables and IR cables when it is in using to avoid cables

damage.

 Use DC5V only. Make sure the specification matched if using 3rd party DC adapters.

1 Introduction

SDI HDbitT fiber optic extender, supports HDbitT transport protocol, extends SDI signal up to

20KM between the source device and display device over optical fiber cables. It supports IR pass

back. This product is perfect for long distance transmisson filed.

2 Features

1. Transmission over single mode optical fiber cables, plug and play

2. Extend resolution 1080p up to 20KM

3. Support IR pass back and remote control conveniently

Produkt Specifikationer

Mærke:	HELGI
Kategori:	AV forlænger
Model:	HI0378SDI
Type:	AV sender & modtager
Produktfarve:	Sort
Kontroltype:	Knapper
Understøttede videotilstande:	480i, 576i, 720p, 1080i, 1080p
Maksimal opløsning:	1920 x 1080 pixel
Pakketype:	Kasse
Impedens:	75 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Udgangsstrøm:	2 A
Modtager vægt:	400 g
Maksimal overførselsafstand:	20000 m
Maksimal opdateringshastighed:	60 Hz
Modtager dimensioner (BxDxH):	168 x 95 x 22 mm
Understøttede kabeltyper:	Fiber
Senderdimensioner (BxDxH):	168 x 95 x 22 mm
Transmitter vægt:	400 g
Båndbredde:	2.97 Gbit/sek.
3,5 mm ind:	Ja
Driftsspænding (modtager):	5 V
3,5 mm ud:	Ja
Driftsspænding (sender):	5 V
Strømforbrug (TX):	10 W
Strømforbrug (RX):	10 W