Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - elettromedia.com
All Specifications Subject to Change Without Notice_19.A
21
hertzaudiovideo.com
CK 165 L
TWO WAY SYSTEM
300 W
C 26:
1. Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural
and yet detailed reproduction of musical nuances.
2. Neodymium magnet with high-density magnetic flux, optimized for maximum
control during high-energy dynamic transients in the mid-high frequency range.
3. Faceplate geometry optimized with FEM (Finite Element Modeling) technique
for a linear frequency response in off-axis installations.
4. Wide range of accessories, for easy integration in OEM placements.
C 165 L:
1. Non-Pressed Paper Cone (NPP) for natural sound and low, powerful damped
frequencies.
2. High-density flux ferrite magnet combined with low-carbon polar plates for
reduced distortion at high power levels.
3. 25 mm (1 in.) voice coil sized for high excursion and wound on aluminium
former to guarantee high power handling.
4. Compact and transparent three-spoke basket, acoustically combined with a
rubber magnet cover for total damping of spurious vibrations.
5. Elegant high resistance ABS plastic grille with a metallic finish combined with a
protective metal mesh.
CCX 2T - CCX 2W:
1. Separate ultra-compact crossovers for woofers and tweeters, to the benefit
of simplicity and flexibility of installation.
2. Tweeter level adjustable via a two-position switch (0, +3 dB) for an optimal
tone balance that can be customized by the user.
3. Low-loss, low-resistance pure copper capacitors and inductances for
maximum sound transparency and clear high frequencies.
ELECTRO-ACOUSTIC
PARAMETERS C 26 C 165 L
Dmm 26 131,5
Xmax mm 5,1 -
Re Ω 3,7 3,2
Fs Hz 1500 60
Le mH 0,02 0,23
Vas I - 13,66
Mms g 0,17 14,2
Cms mm/N 0,07 0,52
BL T•m 1,3 4,9
Qts 1,59 0,60
Qes 3,51 0,70
Qms 2,9 3,8
Spl dB 92 91
TECHNICAL SPECIFICATIONS
Component 2-way system
Size
Woofer mm (in.) 165 (6.5)
Tweeter diaphragm mm (in.) 26 (1)
Voice Coil Ø
Woofer mm (in.) 25 (1)
Tweeter mm (in.) 20 (0.8)
Power Handling W peak 300
W continuos 100
Impedance Ω 4
Frequency
Response Hz 50 5k÷22,
Crossover Type - Cut off
Woofer LP 6 dB / Oct. / 3,8 KHz
Tweeter HP 12 dB / Oct. / 3,8 KHz
Adjustment Tweeter Level 0 / +3 dB
Weight of one component
Woofer kg (lb) 0,973 (2.15)
Tweeter kg (lb) 0,037 (0.08)
Crossover kg (lb) 0,07 (0.15) x 2
