Hikvision DS-2CE56D5T-AIRZ Manual

Hikvision Overvågningskamera DS-2CE56D5T-AIRZ

Læs gratis den danske manual til Hikvision DS-2CE56D5T-AIRZ (4 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Hikvision DS-2CE56D5T-AIRZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

TURBO HD

1080P Dome Camera

User Manual

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FC C

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

UD.6L0201D1818A01

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

This product and - if applicable - the

supplied accessories too are marked

with "C E" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC,

the RoHS Directive 2011/65/EU.

1.2 Overview

1.2.1 Overview of Type I Camera

1.2.2 Overview of Type Camera

1 Introduction

1.1 Product Features

This camera adopts new generation sensor with

high sensitivity and advanced circuit board design

technology. It possesses the features of high

resolution, low distortion, and low noise, etc. It is

extremely suitable for supervisory system and

image processing system.

The main features are as follows:

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

2 Installation

Before you start:

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

0100001050521

Figure 1-1 Overview of Type I Camera

Figure 1-2 Overview of Type CameraII

Privacy Notice

Surveillance laws vary by jurisdiction. Check all

relevant laws in your jurisdiction before using

this product for surveillance purposes to ensure

that your use of this product conforms.

Please refer to the product specification for

camera parameters and functions.

Type

Model

DS-2C E56D5T-AIRZ

DS-2CE56D5T-AVPIR3Z

DS-2C E56D5T-AVPIR3ZH

HD Video Cable

CVBS Cable

Lens

AC24V Power Cable

Black Liner

Bubble

DIP Switch

Auxiliary Video Output

Base Plate

Menu Joystick

2.1 Ceiling Mounting

Steps:

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Figure 2-1 The Drill Template

2 Loosen the screws on the bubble of type 1

camera /rotate the bubble of type2 camera to

remove the bubble and the black liner.

Figure 2-2 Remove the Bubble

Type I: Type I :I

Type I :IType I:

3.Attach the back box of type 1 camera /base plate

of type2 camera to the ceiling and secure them

with supplied self-tapping screws.

4.Route the cables through the cable hole.

Menu Joystick

CVBS Cable

Black Liner

Lens

Bubble

Auxiliary Video Output

DIP Switch

Base Plate

HD Video Cable

AC24V Power Cable

l High performance CMOS sensor and high

resolution bring high-quality image;

l Turbo HD output, up to 1080P resolution;

l 2.8 – 12mm motorized vari-focal lens;

l OSD menu, parameters are configurable;

l Support Day/Night switch;

l SMART IR mode ;

l Support UT C function;

Built-in heater.

The built-in heater function varies according to

different models.

Industry Canada IC ES-003 Compliance

This device meets the CAN I CES-3 (A)/NMB-3(A)

standards requirements.

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Overvågningskamera
Model:	DS-2CE56D5T-AIRZ
Type:	CCTV sikkerhedskamera
Vekselstrømsindgangsspænding:	24 V
Højde:	101 mm
Vægt:	560 g
Produktfarve:	Hvid
Wi-Fi:	Ingen
Formfaktor:	Kuppel
Understøttede videotilstande:	1080p
Relativ luftfugtighed ved drift (H-H):	0 - 90 %
Format til analogt signal:	NTSC, PAL
Ethernet LAN:	Ingen
Driftstemperatur (T-T):	-20 - 45 °C
Maksimal opløsning:	1944 x 1092 pixel
Understøttelse af sprog:	ARA, CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, HEB, ITA, JPN, KOR, POL, POR, RUS, TUR
Understøttede grafikopløsninger:	1920 x 1080 (HD 1080)
Forbindelsesteknologi:	Ledningsført
Strømforbrug (maks.):	6 W
Monteringstype:	Loft
Diameter:	136 mm
Full HD:	Ja
Understøttet placering:	Indendørs
Hvidbalance:	ATW, AWC, Manual
Sensortype:	CMOS
Samlet antal megapixels:	2 MP
Støjreduktion:	Ja
Digital zoom:	62 x
Hældningsvinkelområde:	0 - 75 °
Sammensat videoudgang:	1
Strøm over Ethernet (PoE):	Ingen
Bredt dynamikområde (WDR):	Ja
Dag/nat funktion:	Ja
Infrarød (IR) cut-off filter:	Ja
Minimumsbelysning:	0 Lux
Panoreringsområde:	0 - 355 °
Rotationsvinkel:	355 °
Zoom kapacitet:	Ja
Maksimale blænderåbning tal:	1.4
Nattesyn:	Ja
LED type:	IR
Billedhastighed:	25 fps
Fortrolighedspolitik maskering:	Ja
DC udgangsspænding:	12
Antal kameraer:	1
Synsfelt vinkel (FOV):	103 °
Brændviddeområde:	- mm
Bevægelsessensor:	Ja
Signal/støjforhold:	62 dB
Videoudgang:	1
Output impedans:	75 ohm (Ω)
PTZ-kontrol:	Ja
Nattesyn, afstand:	30 m
Flip & spejl:	Ja
Antal sprog:	16