Hikvision DS-K1T670MX Manual

Hikvision Adgangskontrolsystem DS-K1T670MX

Læs gratis den danske manual til Hikvision DS-K1T670MX (2 sider) i kategorien Adgangskontrolsystem. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Hikvision DS-K1T670MX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Gang box is not supplied.

The height of the can refer to the wall switch standard, and it is about 1.4 m above the ground.Gang box

When inserting an peripheral module, ensure that the silicone rubber ring is intact to prevent rain and other input.

(Optional) According to actual needs, you can connect other modules to the USB interface, and secure them with 2 M3 screws.

Cable Hole

Silicone Rubber

Ring

Apply Silicone

Sealant

Make sure the gang box is installed on the wall.

Secure the

mounting plate

on the gang box with two supplied screws (SC-KA4X25).

Route the cable through the cable hole, wire the cables and insert the cables in the gang box.

Apply silicone sealant among the cable wiring area to keep the raindrop from entering.

Align the device with the mounting plate, and secure the device on the mounting plate with 1 supplied screw (SC-KM3X8-T10-SUS-NL).

UD35448B

Install with Mounting Plate

Interfaces and Dimension

Peripheral Module

For Better recognition, there should be light source in or near the

installation environment.

The minimum bearing weight of the wall or other places should be 3

times heavier than the device weight.

Installation Environment:

Avoid backlight, direct sunlight, and indirect sunlight.

Direct Sunlight

through Window

Indirect Sunlight

through Window

Backlight

Close to Light

118.2 mm

MIC

Camera

Screen

SIM Card Slot

TF Card Slot

Wiring Terminal

Debugging Port

(For debugging only)

Reserved

Tamper

Indicator

26.5 mm

23.85 mm

233.99 mm

Card Presenting/

Fingerprint

Adding Area

Loudspeaker

Type-A USB Interface

DS-K1T670 Series

Face Recognition Terminal

Quick Start Guide

Quick Guide

4 Other Operations

Activate the device.

3 Activation

1.1 Open the box.

1.2 Check the environment.

1.3 Install the device.

2.1 Power supply wiring.

2.2 Door lock wiring.

2.3 Door contact wiring.

2.4 Exit button wiring.

2.5 Wiegand wiring.

2.6 RS-485 wiring.

2.7 Alarm in/out wiring.

4.1 Quick operation settings.

4.2 Authentication settings.

2 Wiring

1 Installation

Installation

If the audio plug diameter is greater than 8 mm, an external adapter is required.

The figures are for reference only.

The peripheral module can be accessed according to actual needs.

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Adgangskontrolsystem
Model:	DS-K1T670MX

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-K1T670MX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Adgangskontrolsystem Hikvision Manualer

Hikvision DS-K3Y411X Manual

1 April 2025

Hikvision DS-K1T8005EFX Manual

1 April 2025

Hikvision DS-K3B801BX-L Manual

1 April 2025

Hikvision DS-K1T808EFX Manual

1 April 2025

Hikvision DS-K1T809EX Manual

1 April 2025

Hikvision DS-K1T8005MFX Manual

1 April 2025

Hikvision DS-K1T8005EFWX Manual

1 April 2025

Hikvision DS-K3B961TX Manual

29 Marts 2025

Hikvision DS-K3B530X-M Manual

29 Marts 2025

Hikvision DS-K1T670MX Manual

28 Marts 2025

Adgangskontrolsystem Manualer

Nyeste Adgangskontrolsystem Manualer

Geovision GV-AS530 Manual

20 Februar 2025

Abus BRIDGE One Manual

5 Januar 2025

ACTi LACS3000 Manual

31 December 2025

EQ-3 HM-LC-BL1-SM Manual

29 December 2024

Abus FG500 HZ Manual

22 December 2024

Vimar 14470 Manual

15 December 2024

Vimar 14470.SL Manual

15 December 2024

Vimar ELVOX 80CN Manual

15 December 2024

Vimar ELVOX 80C3 Manual

15 December 2024

Abus CodeLoxx Manual

9 December 2024