Hikvision DS-K3B801BX-L Manual

Hikvision Adgangskontrolsystem DS-K3B801BX-L

Læs gratis den danske manual til Hikvision DS-K3B801BX-L (2 sider) i kategorien Adgangskontrolsystem. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Hikvision DS-K3B801BX-L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

DS-K3B801BX Series

Swing Barrier

Quick Start Guide

UD31569B

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version of this Manual at the

Hikvision website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in

supporting the Product.

Trademarks

and other Hikvision’s trademarks and logos are the properties of Hikvision in

various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED

“AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE

PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU

FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER

BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT

SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL

OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,

HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND

YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE

APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING

WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA

PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY

PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS

OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR

EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,

THE LATTER PREVAILS.

Data Protection

During the use of device, personal data will be collected, stored and processed. To

protect data, the development of Hikvision devices incorporates privacy by design

principles. For example, for device with facial recognition features, biometrics data is

stored in your device with encryption method; for fingerprint device, only fingerprint

template will be saved, which is impossible to reconstruct a fingerprint image.

As data controller, you are advised to collect, store, process and transfer data in

accordance with the applicable data protection laws and regulations, including without

limitation, conducting security controls to safeguard personal data, such as,

implementing reasonable administrative and physical security controls, conduct periodic

reviews and assessments of the effectiveness of your security controls.

1System Wiring

2Installation

Wiring

1. Draw a central line on the installation

surface of the left or right pedestal.

2. Draw other parallel lines for installing

the other pedestals.

The distance between the nearest

two lines is L + 190 mm. L represents

the lane width.

3. Slot on the installation surface and dig

installation holes according to the hole

position. Put 8 expansion bolts of

M12*120 for each pedestal.

4. Bury cables. Each lane buries 1 high

voltage cable and 1 low voltage cable. For

details, see the system wiring diagram.

High voltage: AC power input

Low voltage: interconnecting cables

The supplied interconnecting cables is 5.5 m

in length.

The suggested inner diameter of the low

voltage conduit is larger than 30 mm.

If you want to bury both of the AC power cord

and the low voltage cable, the two cables

should be in separated conduits to avoid

interference.

If more peripherals are required to connect,

you should increase the conduit diameter or

bury another conduit for the external cables.

The external AC power cord should be

double-insulated.

The network cable must be CAT5e or the

network cable has better performance.

Steps:

1. Prepare installation tools and clean the installation base.

2. Disassemble the pedestal and keep the disassembled components and screws.

3. Drill holes on the ground according to the installation holes on the pedestals and

insert the expansion sleeves.

4. According to the entrance and exit marks on the pedestals, move the pedestals to

the corresponded positions.

5. Secure each pedestal with 8 nuts.

6. After installation, assemble the components and screws back to the pedestal.

Make sure the device is installed on flat surface.

Make sure the device is powered off during installation and other operations.

The installation tools are put inside the package of the pedestal.

If the installation area is close to the wall, make

sure the distance between the pedestal and the

wall should be more than 10 mm, or you might

cause damage to the device or cannot open the

pedestal's top panel.

Dimension

Access Control Board

Reserved

Loudspeaker

Interface

Interconnecting

Interface

(For Sub Extended

Interface Board)

Network

Interface

SOC Serial Port

MCU Serial Port

Reserved

DIP Switch

Reserved

Main Lane

Control Board

Interface

Extended

Interface

12 VDC Output

RS-485 Interface

24 VDC Input

SOC

WIFI

LAN

SWITCH

BUS1

MAIN

LANE

CONTROL

BOARD

USB

GND

12VOUT

RS485C-

RS485A-

RS485C+

RS485A+

24VIN

GND

MIC

SPK

MCU

BUS4

BUS3

MAIN

CROSS

DEBUG1

DEBUG2

Reset Button

SOC and MCU serial port are for debugging and

maintenance use only.

Hold the reset button for 5 s, the device will

beep for 3 s and start restoring to factory

settings.

The DIP switch is for study mode settings and

keyfob pairing. Refer to the user manual for

details.

RS-485A corresponds to UART 5 on web and is

for QR code scanner connection at entrance by

default; RS-485C corresponds to UART 7 on web

and is for card reader connection at entrance by

default.

RS-232A is on the extended interface of BUS3.

RS-232A corresponds to UART 1 on web and is

for fingerprint module connection at entrance

by default.

Entrance

Main Lane Control Board

Main and Sub

Lane Control

Board

Sub Lane

Control Board

Power Supply

Access Control Board

Card Reader Board (Optional)

Access Control Board

Main Switch

Main Extended Interface Board

Sub Extended Interface Board

Sub Extended

Interface Board

QR Code

Scanner

(Optional)

Fingerprint

Module

(Optional)

Secure each pedestal with 8

expansion bolts of M12*150.

1400 mm

500 mm 500 mm

90 mm

15 mm

L + 190 mm

High Voltage

Low Voltage Low Voltage

Main Switch

Access Control Board Access Control Board

Main Extended

Interface Board

Main Extended

Interface Board

Sub Extended

Interface Board

Sub Extended

Interface Board

Sub Lane

Control Board

Main Lane

Control Board

Main Lane

Control Board

Sub Lane

Control Board

Entrance

The diagram is for reference. Dimensions may differ in models.

10 mm 10 mm

175 mm 190 mm

1500 mm

1010 mm

Lane Width

Barrier

Height

Main Lane Control Board

Sub Lane Control Board

Scan the QR code to view the face recognition

installation and wiring video.

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Adgangskontrolsystem
Model:	DS-K3B801BX-L

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-K3B801BX-L stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Adgangskontrolsystem Hikvision Manualer

Hikvision DS-K3Y411X Manual

1 April 2025

Hikvision DS-K1T8005EFX Manual

1 April 2025

Hikvision DS-K3B801BX-L Manual

1 April 2025

Hikvision DS-K1T808EFX Manual

1 April 2025

Hikvision DS-K1T809EX Manual

1 April 2025

Hikvision DS-K1T8005MFX Manual

1 April 2025

Hikvision DS-K1T8005EFWX Manual

1 April 2025

Hikvision DS-K3B961TX Manual

29 Marts 2025

Hikvision DS-K3B530X-M Manual

29 Marts 2025

Hikvision DS-K1T670MX Manual

28 Marts 2025

Adgangskontrolsystem Manualer

Nyeste Adgangskontrolsystem Manualer

Geovision GV-AS530 Manual

20 Februar 2025

Abus BRIDGE One Manual

5 Januar 2025

ACTi LACS3000 Manual

31 December 2025

EQ-3 HM-LC-BL1-SM Manual

29 December 2024

Abus FG500 HZ Manual

22 December 2024

Vimar 14470 Manual

15 December 2024

Vimar 14470.SL Manual

15 December 2024

Vimar ELVOX 80CN Manual

15 December 2024

Vimar ELVOX 80C3 Manual

15 December 2024

Abus CodeLoxx Manual

9 December 2024