Hikvision DS-PDP18-HM Manual

Hikvision Alarmsystem DS-PDP18-HM

Læs gratis den danske manual til Hikvision DS-PDP18-HM (5 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Hikvision DS-PDP18-HM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

DS-PDP18-HM

Wired Double PIR Detector

User Manual

EN50131-2-2:2021

Security Grade 2

Environment Class IV

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

UD33808B

User Manual Flow Chart

1 Appearance

2 Installation

Bracket Tamper

67.3 mm

141.6 mm

60.0 mm

Tamper Switch

LED Jumper

PIR Sensitivity Jumper

High and Low Mounting Adjustment Lever

H Model (default): 2.5 to 3 m (typical 2.7 m)

L Model: 0.8 to 1.2 m (typical 1 m)

LED OFF

Pet Immunity

LED ON (default)

Auto (default)

1.1 Unbox.

1.2 Check components.

Select the wiring type and

connect the detector to the

control panel.

2.1 Confirm environment.

2.2 Fix the device (Wall

mounting/Bracket mounting).

Check detection range

in H and L mode.

Check the indicator,

and the device is

powered on.

1 Appearance

3 Connect to

Control Panel

2 Installation

5 Detection Range

4 Power on

Installation Environment

Facing Direct

Strong Light

Source of

air currents

Facing reflective

surfaces

Areas with

moving objects

Surface that absorb heat or

rapid temperature change area

1Wall Mounting

1. Adjust the knob to the

unlock icon.

2. Press the button.

3. Remove the rear panel.

Wire Slot

4. Method 1 (Recommended):

Thread the cables through the

middle wire hole on the rear panel.

5. Fix the rear panel to the

corresponding position on the wall

with two screws. Remove the wiring

terminal and finish wiring.

Wire Terminal

6. Install the wiring terminal

back and fix the cables into

the wire slot.

7. Adjust the high and low

mounting adjustment lever,

and Install the front panel.

8. Adjust the knob to the lock icon.

Back of Wire hole

4. Method 2: Thread the

cables through the wire

hole on the rear panel.

2 Bracket Mounting

4. Install the bracket to the wall.

6. Remove the bracket tamper

cover on the front panel.

7. Connect the tamper cable to the front

panel, and fix the cable into the wire slot.

8. Adjust the high and low mounting

adjustment lever, and install the front panel.

1. Adjust the knob to the

unlock icon.

2. Press the button.

3. Remove the rear panel.

5. Install the wiring terminal back and fix the

cables into the wire slot. Thread the tamper

cable through the wire hole, and fix the rear

panel to the bracket with one screw.

Wire Slot

9. Adjust the knob to the lock icon.

Wire Slot

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Alarmsystem
Model:	DS-PDP18-HM

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-PDP18-HM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Alarmsystem Hikvision Manualer

Hikvision DS-PKF201-WE Manual

18 December 2024

Hikvision DS-PS110-WE Manual

2 September 2024

Hikvision DS-PS110-WB Manual

2 September 2024

Hikvision DS-PDP15P-EG2 Manual

31 August 2024

Hikvision DS-PHA48-EP Manual

23 August 2024

Hikvision DS-PDSK-P Manual

23 August 2024

Hikvision DS-PDCL12-EG2 Manual

23 August 2024

Hikvision DS-PDSMK-4 Manual

23 August 2024

Hikvision DS-PDPC12P-EG2 Manual

23 August 2024

Hikvision DS-PM1-O4H-H Manual

23 August 2024

Alarmsystem Manualer

Nyeste Alarmsystem Manualer

ORNO OR-MA-718 Manual

17 Juni 2025

Godrej NX Pro Biometric 2025 Manual

14 Juni 2025

Abus RM0010 Manual

8 Marts 2025

Godrej Presidio 50 Manual

7 Marts 2025

Godrej Safire Digital Manual

4 Marts 2025

Redmond SkySmoke RSS-61S Manual

28 Februar 2025

Redmond SkyCenter SC-100S Manual

28 Februar 2025

Godrej EVE PRO 5 Manual

12 Februar 2025

Godrej EVE Pro Manual

12 Februar 2025

Godrej Eagle I NXT Manual

12 Februar 2025