Honeywell RTH7560E Manual

Honeywell Termostat RTH7560E

Læs gratis den danske manual til Honeywell RTH7560E (40 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Honeywell RTH7560E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

RTH7500 Series

Programmable Thermostat

Quick Installation Guide

Tools you will need Tools you may need

Wire stripper

Needle-nose pliers Drill and

drill bit (7/32 in)

Included in your box

Screws and

anchors

UWP

Mounting

System

(UWP)

RTH7500

Thermostat

Quick Install Guide

Small ﬂat head scr

ewdriver

Phillips scr

ewdriver

Pencil

Level

Quick Installation Guide

Removing your old thermostat

2 Check that your system is off.

Change the temperature on your

old thermostat. If you don’t hear the

system turn on within 5 minutes, the

power is off.

1 Turn power OFF.

To protect yourself and your

equipment, Turn off the power at the

breaker box or switch that controls

your heating/cooling system.

3 Remove the old thermostat’s

faceplate.

On most thermostats, you can take

off the faceplate by grasping and

gently pulling. Some thermostats

may have screws, buttons, or clasps.

Do not remove any wires from your

thermostat at this time!

OFF

Breaker box

Switch

4 Make sure there are no 120/240V

wires.

Do you have thick black wires with

wire nuts?

Is your thermostat 120V or higher?

If you answered yes to either of

these questions, you have a line

voltage system and the thermostat

will not work.

If you are unsure visit:

yourhome.honeywell.com/support

Wire nut

Thick black wire

Produkt Specifikationer

Mærke:	Honeywell
Kategori:	Termostat
Model:	RTH7560E
Bredde:	136.14 mm
Dybde:	27.43 mm
Højde:	98.04 mm
Produktfarve:	Grey,White
Skærm:	Digital
Fjernbetjening inkluderet:	Ingen
Baggrundsbelysning:	Ja
Hukommelsesfunktion:	Ingen
Kølende:	Ja
Smart termostat:	Ja