Hughes & Kettner ATTAX Manual


Læs gratis den danske manual til Hughes & Kettner ATTAX (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Hughes & Kettner ATTAX, eller vil du spørge andre brugere om produktet?

Side 1/12
3-CHANNEL
G U I T A R P R E A M P L I F I E R
Hughes & Kettner Musical Instruments
GmbH
Magdeburgerstr.6 6690
St.Wendel
Telefon
(
68
51
)
20
21
Telefax
( 0
68
51
)
4 868
WE AT HUGHES &
KETTNER
WOULD LIKE TO CONGRATULATE
YOU ON YOUR CHOICE OF THE
ATTAX
PREAMP!
The HUGHES
&
KETTNER ATTAX preamp is designed to meet the rigorous demands
placed on contemporary musicians: superior sound quality, flexibility, and user-
friendly operating define the ATTAX as a valuable tool in your quest for the ultimate
sound.
The streamlined operating and control concept enables you to immediately dial in
hot sounds. No fuss, no endless knob twiddling.This Operators Manual introduces
you to the
ATTAX's
features and options.
3 CHANNELS
-
THE STANDARD OF THE
90's
The ATTAX features three separate channels: One solid state CLEAN for vintage and
contemporary clean tones. The two tube channels, CRUNCH and LEAD, are carefully
tuned for a broad overdrive spectrum, from a slight crunch to heavy duty shred.
TWO EFFECTS LOOPS!
The ATTAX features two separate loops for effects/multi-effects devices: a standard
MONO FX LOOP with SEND and RETURN jacks and a STEREO LOOP with a SEND
and two RETURN jacks (Left/Right).
STEREO SETUP
-
NO PROBLEM!
The output, effect, and master sections feature stereo circuits enabling stereo setups,
o. g. with a stereo power amp and two cabinets. Stereo effects processors can be
added through the STEREO LOOP for optimum effects utilization.
FREQUENCY-CORRECTED RECORDING OUT JACKS
The two Recording Out jacks feature frequency-corrected signal paths that simulate
the sound of a miked 4 x
12"
cabinet, an ideal tool for home recording, studio
situations, and on stage DI to the mixer.
MIDI
-
THE ULTIMATE CONTROL FEATURE!
The MIDI option requires no soldering. Installation is simple, and offers the ATTAX
user all the comfort of MIDI capabilities. All three channels and the effects loop can
be called via MIDI program change messages.
We hope you have fun and enjoy success with your ATTAX!


Produkt Specifikationer

Mærke: Hughes & Kettner
Kategori: Ikke kategoriseret
Model: ATTAX

Har du brug for hjælp?

Hvis du har brug for hjælp til Hughes & Kettner ATTAX stil et spørgsmål nedenfor, og andre brugere vil svare dig