Icom OPC-2350LU Manual


Læs gratis den danske manual til Icom OPC-2350LU (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Icom OPC-2350LU, eller vil du spørge andre brugere om produktet?

Side 1/2
SAVE THESE INSTRUCTIONS! These instructions con-
tain important safety and operating details for the data ca-
ble.
WORD DEFINITION
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only.
No risk of personal injury, fire or elec-
tric shock.
CAUTION: USE ONLY INDOORS! NEVER expose the data
cable to rain, snow or any liquids.
CAUTION: NEVER let metal, wire, or other objects touch
any internal part of the connectors.
CAUTION: NEVER use other than the supplied cables. DO
NOT extend the USB cable. If a different cable or a cable
longer than 1.5 m (4.9 ft) is used, a data error may occur.
DO NOT use harsh solvents such as Benzine or alcohol
when cleaning, as they will damage the cables.
Ensure that your PC supports USB port operation by con-
firming the Universal Serial Bus controller is in the PC’s De-
vice Manager.
Connect the OPC-2350LU data cable to the OPC-1637 USB
cable, then connect the USB cable to the PC’s USB port di-
rectly, or to a self-powered USB hub.
Approximately 20 mA of current is required for the data ca-
ble. Insufficient current capacity of the USB port can cause
unstable operation and an error.
Usable temperature range
–1C ~ +60˚C (+14˚F ~ +140˚F)
Cable length (Approximately)
OPC-2350LU: 530 mm (20.9
in)
OPC-1637 USB cable: 1500 mm (4.9 ft)
USB cable (For Android
devices): 750 mm (30 in)
Weight (Approximately)
OPC-2350LU*: 34 g (1.2 oz)
*with Ferrite EMI Filter
OPC-1637 USB cable: 49 g (1.7 oz)
USB cable (For Android
devices): 30 g (1.1 oz)
(As of November 2021)
A PC with the following is required:
• Microsoft Windows
10 32 bit/64 bit
Microsoft Windows
8.1 32 bit/64 bit*
*Except for the “RT” version.
• A USB 1.1 or 2.0 port
An Internet connection is required for the USB driver in-
stallation.
For details on using the OPC-2350LU to connect an An-
droid device with your PC, see the manual for the applica-
tion and the transceiver you want to use.
The crossed-out wheeled-bin symbol on your prod-
uct, literature, or packaging reminds you that in the
European Union, all electrical and electronic prod-
ucts, batteries, and accumulators (rechargeable
batteries) must be taken to designated collection locations
at the end of their working life. Do not dispose of these prod-
ucts as unsorted municipal waste. Dispose of them accord-
ing to the laws in your area.
Below statement is for UKCA purpose only
United Kingdom Authorised Importer: Icom (UK) Ltd.
Address: Blacksole House, Altira Park, Herne Bay, Kent,
CT6 6GZ, U.K.
Thank you for choosing this Icom product. READ
ALL INSTRUCTIONS carefully and completely be-
fore using this product.
INSTRUCTIONS
DATA CABLE
IMPORTANT
EXPLICIT DEFINITIONS
PRECAUTIONS
SUPPLIED ACCESSORIES
SPECIFICATIONS
SYSTEM REQUIREMENTS
A7176W-1G-3 Printed in Japan
© 2014–2022 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Aug. 2022
CABLE CONNECTION AND USB DRIVER INSTALLATION FOR A PC
Icom and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain,
Russia, Australia, New Zealand, and/or other countries.
Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Microsoft and Windows are trademarks of the Microsoft group of companies.
Android is trademarks or registered trademarks of Google LLC.
All other products or brands are registered trademarks or trademarks of their respective holders.
These instructions are based on using
Microsoft
Windows
10.
q Attach the Ferrite EMI filter to the strain relief of the OPC-
1637 USB cable.
w Connect the OPC-2350LU data cable to the OPC-1637
USB cable, and then connect the USB cable to the PC’s
USB port, as illustrated below.
OPC-1637 USB cable
to the USB port
OPC-2350LU
Strain relief
to the transceiver
e The driver installation status icon is displayed at the bot-
tom of the desktop screen.
For your information: If the installation status icon is
clicked, the “Installing device...” dialog is displayed.
r When the installation status icon disappears, the driver
installation is completed. Restart your PC.
t After the driver installation has been completed, confirm
the driver availability and the port number.
The COM port number is used to set communication
with the cloning software. Refer to the driver installation
guide for details. You can download the Driver installa-
tion guide from Icom website.
NOTE:
If the driver installation above is not successful, down-
load and install the driver from the Icom website. Refer
to the drivers installation guide for details.
You need Adobe Acrobat
Reader to view the download-
ed USB driver installation guide.
If you do not have Adobe Acrobat
Reader, download it
from the Adobe website.
CABLE CONNECTION FOR AN ANDROID DEVICE
q Attach the Ferrite EMI filter to the USB cable (For An-
droid
devices).
w Connect the OPC-2350LU data cable to the USB cable
(For Android
devices), and then connect the USB cable to
the Android
device’s USB port, as illustrated.
Remove the USB cable when the Android device is not
used. When connected, it increases the power con-
sumption of Android device.
NOTE:
If the Android
device does not work correctly, move away
from the transceiver.
USB cable
OPC-2350LU
to the transceiver
OPC-1637
USB cable
Ferrite
EMI filters
USB cable
(For Android devices)
DISPOSAL
Icom is not responsible for the destruction, damage to, or
performance of any Icom or non-Icom equipment, if the
malfunction is because of:
Force majeure, including, but not limited to, fires, earth-
quakes, storms, floods, lightning, other natural disas-
ters, disturbances, riots, war, or radioactive contamina-
tion.
The use of Icom products with any equipment that is not
manufactured or approved by Icom.
OPC-2350LU
 このたびは、本製品をお買い上げいただきまして、まことに
ありがとうございます。
 本製品は、弊社製無線機とパソコンやAndroid端末をUSB
接続するためのデータ通信ケーブルです。
データ通信ケーブル
取扱説明書
OPC-2350LU
◎使用者、および周囲の人への危害や財産への損害を未然に防ぎ、製品を安全に正しくお使いいただくために守っていただきたい注
意事項を示しています。
◎次のR警告』R注意』の内容をよく理解してから本文をお読みください。
◎お読みになったあとは、いつでも読める場所へ大切に保管してください。
R
警告
これを無視して誤った取り扱いをすると「使用者、
および周囲の人が、死亡、または重傷を負う可能性
が想定される内容」を示しています。
R
注意
これを無視して誤った取り扱いをすると人が傷
害を負う可能性が想定される内容および物的損
害のみの発生が想定される内容」を示しています。
アイコム、ICOM、ICOMロゴは、アイコム株式会社の登録商標です。
Adobe、Acrobat、Readerは、Adobe Systems Incorporated(アドビシステムズ社)の登録商標です。
Microsoft、Windowsは、マイクロソフト企業グループの商標です。
Google、Googleロゴ、Google Play、Google Playロゴ、Android、AndroidロゴはGoogle LLCの登録商標です。
その他、本書に記載されている会社名、製品名は、各社の商標または登録商標です。
なお、本文中ではTM、®などのマークを省略しています。
本書の内容の一部、または全部を無断で複写/転用することは禁止されています。
登録商標/著作権について
付属品
USBケーブル
(OPC-1637)
フェライトコ
USBケーブル
(Android端末用)
®
【免責事項について】
地震風水害などの天災および当社の責任以外の火災、本製品の違
法な使用、お客様または第三者が取扱説明書とは異なる使用方法で本
製品を使用することにより生じた損害につきましては、法令上の賠償
責任が認められる場合を除き、当社は一切責任を負いませんので、
らかじめご了承ください。
安全にお使いいただくために、ご使用の前に、必ずお読みください。
R警告
下記の事項をない火災、感電、故障の原因にす。

指定以外の機器接続ないさい。

指定以外の付属品、び別売品は使用ないでださい。

指定以外の目的使用ないでださい。

本製品の上ものを載せた挟んないさい。

工したり、たり、ねじったり、引っ張ったり、
りし

水なでぬれやすい場所で接続はずないで
ださい

本製品内部に液体、金属なの異物が入ないさい。
ぬれた手で本製品を使用ないでさい。
  感電の原因になます
分解、改造は絶対にないでさい。
 また、ご自分で修理しないでください。
  けが、火災、感電、故障の原因になます
R注意
ケーブルの接続端子な金属部分に触れないでさい。
  けが、接続不良の原因にがあす。
清掃す洗剤や有機溶剤ンナーベンンなを絶対
使用ないでださい。
  ケースが損傷したり、塗装がはがれたりする原因になることがあ
ります。
  ふだんは、乾いたやわらかい布でふき、汚れのひどいときは、水を
含ませたやわらかい布をかたく絞ってふいてください。
  ただし、ケーブルの接続端子は、絶対に水を含ませた布でふかない
でください。
本製品を抜き差するきは、理な力を加えないださい。
  故障、破損の原因があます
本製品のUSBドライバーは、次の日本語OSで動作するパソ
コンに対応します。 (2021年11月現在)
Microsoft Windows 10 (32ビット/64ビット)
Microsoft Windows 8.1 (32ビット/64ビット)
Microsoft Windows 8.1のRTバージは対応ていせん。
◎[USB]ポト(USB1.1/USB2.0)を
応します。
USBドライバーをパソコンにインストールするにはパソコ
ンがインターネットに接続できる環境になっている必要があ
ります。
本製品をAndroid端末に接続して使用する場合に必要な動作
環境は、ご使用になるアプリや無線機の取扱説明書でご確認く
ださい。
547ー0003
大阪市平野区加美南
1ー1ー32
動作環境について
USBケーブルの接続とドライバーのインストール
本製品をパソコンに接続すると、USB ドライバーのインストー
ルを自動で開始します。
本書では、
Microsoft Windows 10
を例に説明しています。
本書中の画面や操作は、OSのバージョンや設定によって、
使いになるパソコンと多少異なる場合があります。
q
本製品をパソコンの[USB]ポートに接続します。
下図のよを挟みなら付属のを取
り付
w
タスクバーにアイコンが表示され、自動的にインストールを
開始します。
ご参考
インストール中にアイコンをクリックするとFT232R USB
UARTをインストールしています」画面を表示します。
e
タスクバーからアイコンが消えたら、インストール完了です。
ご使用のパソコンによっては、再起動の確認画面が表示され
ますので、画面の指示にしたがって操作してください。
r
本製品のドライバーが正常にインストールされていることを
確認します。
詳しい手順については弊社ホームページ(下記)に掲載されて
いるインストールガイド(PDFファイル)をご覧ください。
アイコム株式会社 サポート情報(個人のお客様)
https://www.icom.co.jp/support/personal/
弊社ホームページからのダウンロード手順については、
告なく変更する場合がありますのであらかじめご了承くだ
さい。
USBケーブル
(Android端末用)
(付属品)
OPC-2350LU
[USB]
ポートへ
無線機へ
OPC-2350LU
USBケーブル(OPC-1637)
(付属品)
[USB]ポートへ
パソコン
ブッシュ
無線機へ
Android端末との接続
(OPC-2350LU)をAndroid端[USB]
続します。
図のに付属の付け
バッテリーの消耗が早くなりますので本製品を使用しない
ときはAndroid端末からはずしてください。
USB接続についてのご注意
パソコンの[USB]ポートが「有効」に設定されていることを確認し
てください。
 
※OSのデバイスマネージャーで確認できます。
付属のUSBケーブル以外をご使用になるとデータ通信中に誤動
作することがありますので、必ず付属のUSBケーブルをご使用く
ださい。
約20mAの電流が必要ですのでキーボードなど小電力機器の
[USB]ポートでは使用できません。
 
[USB]ポートで多くの機器を使用している場合は十分な電力が供給
できないため、データ通信中に誤動作することがあります。
USB HUBに接続してご使用になる場合はセルフパワー対応
ポートに接続してください。
 
セルフパワーについては、ご使用になるUSB HUBの取扱説明書でご
確認ください。
仕様について
使用温度範囲 -10℃~+60℃
ケーブル長 約530mm(OPC-2350LU)
約1500mm
(USBケーブル(OPC-1637)
約750mm(USBケーブル
Android端末用)
: 約34g(OPC-2350LUフェライトコアを含む)
約49g
(USBケーブル(OPC-1637)
約30g
(USBケーブル
Android端末用)
ご注意
Android端末が正常に動作しないときはとAndroid端末
の距離をはなして使用してください。
USBドライバーがインストールされないときは
USBドライバーが正常にインストールされないときは、弊社ホームページ(下記)でUSBドライバーをダウンロードしてインストールしてください。
アイコム株式会社 サポート情報(個人のお客様)
https://www.icom.co.jp/support/personal/
USBドライバーインストールガイド(PDFファイル)をご覧になるためには、Adobe Acrobat
Readerが必要です。
お持ちでない場合は、Adobeホームページからソフトウェアをダウンロードしてください。


Produkt Specifikationer

Mærke: Icom
Kategori: Ikke kategoriseret
Model: OPC-2350LU

Har du brug for hjælp?

Hvis du har brug for hjælp til Icom OPC-2350LU stil et spørgsmål nedenfor, og andre brugere vil svare dig