IFi Audio Zen DAC V2 Manual

IFi Audio Hovedtelefoner Zen DAC V2

Læs gratis den danske manual til IFi Audio Zen DAC V2 (1 sider) i kategorien Hovedtelefoner. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om IFi Audio Zen DAC V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

7. Balanced 4.4mm analogue output

This is an analogue output via 4.4mm > XLR or other balanced

interconnects. You could use this for an active speaker or an amplifier.

Tip: As ZEN DAC is balanced, this is the recommended output.

8. Variable/Fixed switch

When the rear UnBAL/BAL analogue outputs are used, this switch

will determine whether or not ZEN DAC analogue volume control

is used.

9. RCA analogue output

10. USB-audio and power input

This is a USB input. It connects ZEN DAC to the computer audio

source and provides the power supply.

11. DC 5V power

ZEN DAC is powered by 5 volts, either via the enclosed USB cable

(for connection to laptop or PC) or DC power supply (not included).

Tip: For best performance upgrade the USB power supply to a super-low noise

power adapter such as iFi iPower or iPower X.

Note: For use with PC it is necessary to download drivers.

Tip: For all latest firmware updates please refer to our website here:

www.ifiaudio.com/downloads/

ZEN DAC

Thank you for purchasing the DAC from ZEN series. The DAC is a

balanced USB-audio DAC amplifier.

1. PowerMatch (high/low)

PowerMatch setting should be on low for IEMs and on high for

on/over headphones.

Warning: Due to the high power of ZEN DAC, before changing the PowerMatch

setting, always start off at a low volume level so that there is no risk of damage to

your headphones, speakers or your hearing. iFi audio is not responsible for any

hearing or equipment damage from misuse.

2. TrueBass (high/low)

Many headphones lack the correct bass response. TrueBass is an

analogue circuit designed to 'add back' the lost bass response

for the most accurate playback.

Tip: Open-back headphones and some IEMs usually sound better with TrueBass

set high. Adjust to suit.

3. Analogue Volume control

The analogue volume control in ZEN DAC is superior to any

digital volume control. It can be used to control the headphone

volume or the pre-amplifier volume (when set to 'Variable'). If the

output at the rear is set to 'Fixed' the volume control is bypassed.

4. Audio Format LED (kHz)

The LED colour scheme indicates the audio format and sampling

frequency received by ZEN DAC from the music source.

LED Mode

Yellow PCM 44.1/48kHz

White PCM 88.2/96/176.4/192/352.8/384kHz

Cyan DSD 64/128

Red DSD 256

Green MQA

Blue MQA Studio

Magenta Original Sample Rate*

*MQB

5. Single-ended 6.3mm output

Connect single-ended 6.3mm headphones. With single-ended

3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.

6. Balanced 4.4mm analogue output

Connect balanced 4.4mm headphones.

Tip: As ZEN DAC is balanced, we recommend the 4.4mm output.

Ver1.0

ifi-audio.com

POWE R MATCH

TRUE BASS

2 3 51 64

Specification

Input: USB3.0 B Socket (USB2.0 compatible)

Formats: 44.1/48/88.2/96/176.4/192/352.8/384kHz PCM

2.8/3.1/5.6/6.2/11.2/12.4MHz DSD

353/384KHz DXD

MQA

DAC: Bit-Perfect DSD & DXD DAC by Burr Brown

Line Section

Output:

Balanced 4.4mm: 2V / 6.2V max. (variable) 4.2V fixed

UnBAL RCA: 1V / 3.3V max. (variable) 2.1V fixed

Zout:

Balanced: <= 200Ω

UnBAL: <= 100Ω

SNR: <-116dB(A) @ 0dBFS (UnBAL/BAL)

DNR: >116dB(A) @ -60dBFS (UnBAL/BAL)

THD+N: <0.0015% @ 0dBFS (UnBAL/BAL)

Headphone Section

Output:

Balanced 4.4mm: 2V / 6.2V max. 12Ω - 600Ω

UnBAL 6.3mm: 1V / 3.3V max. 12Ω - 300Ω

Output Power:

Balanced: >380mW @ 50Ω; >70mW @ 600Ω

UnBAL: >280mW @ 32Ω; >36mW @ 300Ω

Output Impedance: <1Ω (UnBAL/BAL)

THD+N: <0.005% (125mW @ 32Ω)

SNR: >113dBA (3.3V UnBAL / 6.2V BAL)

Power consumption: No Signal ~0.5W

Max Signal ~2.5W

Dimensions: 158 x 117 x 35 mm

6.2" x 4.6" x 1.4"

Weight: 491 g (1.08 lbs)

Warranty period: 12 months

Specifications are subject to change without notice.

7 8 9 10 11

Produkt Specifikationer

Mærke:	IFi Audio
Kategori:	Hovedtelefoner
Model:	Zen DAC V2

Har du brug for hjælp?

Hvis du har brug for hjælp til IFi Audio Zen DAC V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hovedtelefoner IFi Audio Manualer

IFi Audio iDSD Diablo-X Manual

30 August 2024

IFi Audio GO pod Manual

20 August 2024

IFi Audio ZEN Air DAC Manual

20 August 2024

IFi Audio Zen One Signature Manual

17 August 2024

IFi Audio Zen DAC V2 Manual

17 August 2024

Hovedtelefoner Manualer

Nyeste Hovedtelefoner Manualer

Trust Nouna 25277 Manual

3 April 2025

PowerLocus P2 Manual

3 April 2025

Sennheiser RS 120-W Manual

1 April 2025

Celly PC2USBCEARPIN Manual

1 April 2025

Celly Ultrasound Manual

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025