IFM E33212 Manual


Læs gratis den danske manual til IFM E33212 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om IFM E33212, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation instructions
Aseptoflex Vario adapter
with O-ring / PEEK sealing ring
E332xx
E333xx
704965/01 02/2011
UK
2
1 Installation sensor - adapter
C
B
A
Grease the sensor thread with
paste (A).
The paste must be suitable and ap-
proved for the application and com-
patible with the elastomers used.
Place the sealing ring (B) in the
groove (C) of the sensor.
Screw the sensor into the adapter
until it is hand-tight. When doing
so, avoid mechanical effects on the
sealing areas, the hygienic area and
the pressure measuring cell.
D
Clamp the sensor + adapter into a
clamping device (D). Tighten the
clamping device only slightly so that
the adapter does not warp.
Tighten the sensor using a spanner
until you can feel the end stop (this
corresponds to a maximum tighten-
ing torque of 35 Nm). Note: Further
tightening may affect the sealing
effect.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E33212

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E33212 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM EVT289 Manual

22 August 2025
IFM

IFM EVC874 Manual

20 August 2025
IFM

IFM EVC875 Manual

19 August 2025
IFM

IFM EVC876 Manual

19 August 2025
IFM

IFM PG1743 Manual

19 August 2025
IFM

IFM SUH251 Manual

19 August 2025
IFM

IFM AL4342 Manual

19 August 2025
IFM

IFM AL4043 Manual

19 August 2025
IFM

IFM PG1707 Manual

19 August 2025
IFM

IFM TA2107 Manual

19 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer