ILive IAEBT40 Manual

ILive Øreprop IAEBT40

Læs gratis den danske manual til ILive IAEBT40 (2 sider) i kategorien Øreprop. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om ILive IAEBT40, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Charging the Case

Using a cable (included), USB-C to USB

connect to the USB port of a powered

on computer or USB power adaptor (not

included) to charge the case. When the case is

charging the Power & Battery Indicator LEDs

will ash blue. When fully charged all LEDs will

turn solid blue.

Truly Wire Free Earbuds

User’s Guide for Model IAEBT40 v2712-01

Power & Battery Indicator LEDs

The 4 blue LEDs represent the amount of battery

the case charger has.

1 LED=25%

2 LEDs=50%

3 LEDs=75%

4 LEDs=100%

Function Button

Press and hold for 5 seconds to power ON/OFF.

Press to play/pause music.

Press to answer/end phone calls.

Press and hold for 2 seconds to reject incoming calls.

Press and hold for 2 seconds to activate voice assistant. (SIRI or Google assistant)

Quickly press twice to skip to next track (RIGHT).

Quickly press twice to play previous tracks (LEFT).

Quickly press three times to turn volume up (RIGHT).

Quickly press three times to turn volume down (LEFT).

Charging Contacts

Charging the Earbuds

1. Open the cover and place the earbuds on the charging contacts.

Be sure to match the left and right earbuds with the correct

docking station in the case.

2. When charging, the rst and fourth Power & Battery Indicator

LEDs on the case will ash blue. When charging is complete, the

indicator LEDs will turn o.

3. will turn red when charging. When fully Earbud Indicator LEDs

charged, the LEDs will turn o.

Earbud Indicator LED/Microphone

Red when charging.

Lights o when fully charged.

Speakerphone

• To accept or end a phone call, press the Function button.

• You can also use the controls on the connected phone to

handle phone functions.

Charging Case & Auto-On Feature

While the case power is ON:

• Placing the earbuds in the charging case will

automatically power them o and begin charging.

• Removing the earbuds from the case will automatically

power them on, link them, and connect to the last used

Bluetooth device (earbuds must have been linked and

connected to a Bluetooth device already).

Pairing Bluetooth

Note: When earbuds are powered on they automatically

link and enter into pairing mode. You can power on a single

earbud to use as a single unit if you wish.

1. With the earbuds linked, you can now connect to your

Bluetooth device. The LED indicator on the right earbud

will continue ashing blue and red, indicating it is ready

to pair to a Bluetooth device.

2. On your Bluetooth device, access Bluetooth Settings

and search for nearby devices. Select when IAEBT40

it is discovered. When successfully connected to your

Bluetooth device, the LED indicator on both of the

earbuds will ash blue, slowly and a voice prompt will

announce the Bluetooth connection.

3. Audio played through the connected Bluetooth device

will now be heard through both earbuds. Use the

controls on the connected device to play audio and

adjust volume.

PLEASE NOTE: Due to the nature of truly wireless

earbuds, you may experience slight interruptions

with your audio in areas with multiple 2.4Ghz

bands or in high wireless trac areas.

Customer Support

Customer Service: | Email Support: 1-888-999-4215 prodinfo@

dpiinc.com partsinfo@dpiinc.com | Email Parts:

For Warranty Information and the most up-to-date version of

this User’s Guide, go to www.iLiveElectronics.com

To download this User’s Guide in English, Spanish, or French, or

to get answers to frequently asked questions, visit the support

section at: www.iLiveElectronics.com

Para descargar este Manual del Usuario en inglés, español y

francés, o para obtener respuestas a preguntas frecuentes,

visite la sección de apoyo en: www.iLiveElectronics.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol

ou français, ou pour obtenir des réponses à des questions

fréquemment posées, consultez la rubrique d’assistance sur:

www.iLiveElectronics.com

other trademarks appearing herein are the property of their

respective owners. Specications are subject to change without

notice.

FCC Warnings

WARNING: Changes or modications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• WARNING: To prevent re or shock hazards, do not expose this unit to rain

or moisture.

• WARNING : Where the mains plug or appliance coupler is used as the

disconnect device, such disconnect device shall remain readily operable.

• Lithium batteries, like all rechargeable batteries, are recyclable and should be

recycled or disposed of according to state and local guidelines. They should

never be disposed of in normal household waste, and they should never be

incinerated, as they might explode. Contact your local government for disposal

or recycling practices in your area.

• This product meets and complies with all Federal regulations.

• To avoid hearing damage, make sure that the volume on your music player

is turned down before connecting your headphones. After placing headphones

in/on your ears, gradually turn up the volume until you reach a comfortable

listening level.

WARNING : This product can expose you to chemicals

including lead, which is known to the State of California to

cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

This product meets and complies with required Federal

product guidelines.

Produkt Specifikationer

Mærke:	ILive
Kategori:	Øreprop
Model:	IAEBT40

Har du brug for hjælp?

Hvis du har brug for hjælp til ILive IAEBT40 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Øreprop ILive Manualer

ILive IAEB29 Manual

1 September 2024

ILive IAEBT40 Manual

1 September 2024

ILive IAEBT270 Manual

1 September 2024

ILive IAEBT411 Manual

1 September 2024

ILive IAEBT209 Manual

1 September 2024

ILive IAEBT300 Manual

1 September 2024

1 September 2024

22 August 2024

22 August 2024

22 August 2024

Øreprop Manualer

Nyeste Øreprop Manualer

Energy Sistem StreetMusic Manual

30 Januar 2025

Adidas FWD-02 Manual

8 Januar 2025

Skullcandy Jib True XT 2 Manual

7 Januar 2025

GMB Audio TWS-02 Manual

7 Januar 2025

JBL Wave Buds 2 Manual

5 Januar 2025

Audio-Technica ATH-CC500BT2 Manual

5 Januar 2025

Audio-Technica ATH-CKS50TW2 Manual

5 Januar 2025

Prixton TWS163 Wood Manual

5 Januar 2025

JVC HA-NP40T Manual

4 Januar 2025

AKAI BTE-J20ANC Manual

1 Januar 2025