Iluv TimeShaker Hotel Manual

Iluv Ikke kategoriseret TimeShaker Hotel

Læs gratis den danske manual til Iluv TimeShaker Hotel (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Iluv TimeShaker Hotel, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

iLuv®, TimeShakerTM, and GreeNology® trademarks are the exclusive properties of jWIN Electronics Corp.

and are registered with the U.S. Patent and Trademark Oce, and may be registered or pending registration

in other countries. All other iLuv® trademarks, service marks, and logos may be registered or pending

registration in the U.S. or in other countries. All other trademarks or registered trademarks are the property

of their respective owners.

Quick Start Guide

• Button Callout

• Function / note

• Time Set

LED Alarm Clock for Hotel

TimeShaker® Hotel

Alarm

1. For all settings, if no button is pressed for 5 seconds all changes

will be automatically saved.

1. Press the power button to turn on the unit. Slide the “mode”

switch to AM / FM for listening to radio or AUX for listening to

Aux-in music through built-in Aux-in cable.

1. Press the sleep button to go to “Sleep” mode. The sleep LED will stay on.

2. The display will show the sleep interval of 90, 60, 45, 30, 15 minutes or OFF.

3. The unit will automatically power o after the selected sleep time.

4. The display will change back to show current time if there are no

adjustments for 3 seconds. After showing the current time, press the sleep

button once to show remaining sleep time for 3 seconds. During the display

remaining of sleep time, press the sleep button again to adjust.

5. Users can stop the sleep operation before it times out by pressing the

sleep button utill the display shows "OFF" or press the “Power” button

anytime.

3. Press the + or - button to tune radio to a station you want. Press

and hold to seek for the next clear station.

5. The display will change back to show the current time if there are

no adjustments for 3 seconds.

4. For Aux-in, the display will show.

6. Press Power button again to turn o the unit.

2. For listening to the radio, the display will change to show the radio frequency.

AM Radio FM Radio

2. Adjusting item(s) should be ashing.

• Wake to Source

Depend on the WAKE-TO switch setting, the unit will wake to buzzer or radio.

• Alarm Disarmed

When the alarm goes o, press either Alarm set, Power or slide Alarm

on/o switch from On to O will stop the alarm. Alarm will be disarmed

(will not come back tomorrow) - one day alarm function.

• Radio/Aux-in Operation

•Sleep Operation

1. When the alarm goes o, press the snooze button to stop the alarm

sound for 9 minutes.

2. During standby mode, press and hold snooze button to adjust the LED

display brightness. Total of 3 steps (from bright to dim then from dim to

bright).

• No time will display but time will saved

• The “battery low” icon will stay on when the battery is close to dead

• Info that will save:

- Alarms time/setting

- Current radio station

- Clock

•Snooze / Dimmer

•Battery Backup

• Placing Back on Unit:

• Security Lanyard

1. Press and hold the Time Set button for 2 seconds to go to “Test set”

mode. Display will be ashing.

2. Press + or - button to adjust the time, press and hold + or - to

adjust more quickly.

3. For 12hour format, the light dot located in the upper left corner of the

clock display indicates the time is PM. For AM time, this dot will not light up.

4. Press the “Time set” button again

to adjust the YEAR, start from 2016

to 2099 (e.g. 2016)

5. Press the “Time set” button again

to adjust the Month (e.g. Feb)

6. Press the “Time set” button again

to adjust the Day (e.g. Feb 06)

7. Press the “Time set” button again to exit.

• Daylight Saving Time (DST)

DST Eﬀective day

1. Slide DST switch to On for auto DST*

* USA only

2. Slide DST switch to O to turn o auto DST function.

• 12 / 24 HR

1. Slide the “12/24” switch to 12 to show the 12 hour format. If DST is set at

”ON" it will automatically activate.

Placing Back on Unit:

Screw piece onto unit.

Make sure time is correctly set rst.

2. Slide the “12/24” switch to 24 to show the 24 hour format. DST function

will be disabled if set to 24 hour format.

• Alarm Time Set

1. Press the Alarm set button for 2 seconds.

2. The display will change to show

the alarm time while ashing.

The alarm indicator will turn on too.

The default alarm time is 6:00am.

3. Press the + or - button to adjust the time, and press and hold + or - to

adjust more quickly.

4. For 12hour format, the light dot located in the upper left corner of the

clock display indicates the time is PM. For AM time, this dot will not light up.

5. Press the “Alarm set” button again to exit (or anytime you switch the Alarm

On/O switch it will store the setting and exit). If you do not press any

button for 5 seconds while setting alarm, alarm will store at currently

displayed time.

6. The alarm will automatically set to set alarm time. Alarm LED will stay on.

7. Alarm will auto disarm after alarm sounding. Alarm LED will stay o.

Year Start End

2016 March 13 November 6

2017 March 12 November 5

2018 March 11 November 4

2019 March 10 November 3

2020 March 8 November 1

Left Side Right Side

Alarm Set Power

Tune up

Tune down

Snoo ze I Di m mer I Sleep

Top

Alarm

Display

Rear

Insert screw into screw

hole on lanyard

• Installation of the Backup Battery

Locate the backup battery compartment on the bottom of the unit and open.

Insert 2 "AAA" batteries, which will keep the time and alarm settings in the event

of power failure or disconnection of the power cord.

Reorient or relocate the receiving antenna.

Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Increase the separation between the equipment and receiver.

WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Produkt Specifikationer

Mærke:	Iluv
Kategori:	Ikke kategoriseret
Model:	TimeShaker Hotel

Har du brug for hjælp?

Hvis du har brug for hjælp til Iluv TimeShaker Hotel stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Iluv Manualer

Iluv Time Shaker 6Q Wow Manual

15 Juli 2025

Iluv Aud Click Manual

23 Februar 2025

Iluv TrueBTAir Manual

23 Februar 2025

Iluv TimeShaker Boom Manual

23 Februar 2025

Iluv TimeShaker Wow Manual

23 Februar 2025

Iluv TimeShaker 5Q Wow Manual

23 Februar 2025

Iluv SyrenPro Manual

22 Februar 2025

Iluv RockWall Power 2 Manual

22 Februar 2025

Iluv Mo'Beats HD Manual

22 Februar 2025

Iluv Morning Call 3 Manual

22 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo SOEG-S-M18W-S-L Manual

18 August 2025

Festo SIED-M30NB-ZO-S-L Manual

18 August 2025

Parkside PFBSA 4 A1 Manual

18 August 2025

Martin VC-Dot 4 Manual

18 August 2025

Smart-AVI QKVM-DP Manual

18 August 2025

Festo SOEG-RTH-M18-NS-S-2L Manual

18 August 2025

Festo CPV10-VI-P4-M7-D Manual

18 August 2025

D-Link DI-206 Manual

18 August 2025

Royal Catering RCWF-10LE-H Manual

18 August 2025

Festo SIED-M30B-ZO-K-L Manual

18 August 2025