Imarflex IB-655GC Manual

Imarflex Blender IB-655GC

Læs gratis den danske manual til Imarflex IB-655GC (4 sider) i kategorien Blender. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Imarflex IB-655GC, eller vil du spørge andre brugere om produktet?

Side 1/4
+
SPECIFICATION
MODEL NO. : -655GC IB
RATED VOLTAGE : 230Va.c. 60Hz
POWER CONSUMPTION : 600 Watts
BOX DIMENSION : ______________
UNIT DIMENSION : ______________
GROSS WEIGHT : ______________
UNIT WEIGHT : ______________
RPM
: Medium Speed RPM_____
: Low Speed RPM________
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
1. Read all instructions thoroughly.
2. Before using the unit, check if the voltage indicated matches the
convenience outlet (230Va.c.).
3. Do not use the two-way socket with another appliance.
4. Do not use any appliance with a damaged cord or plug. If the
cord is damaged, it should be replaced with the same type and
size, or the unit should be taken to the nearest Imarex
Authorized Service Center.
5. Do not place the unit near a gas stove, electric burner, or in a
heated oven.
6. Place the unit on a stable surface; keep it away from the edge of
the counter to avoid accidents.
7. Children should be supervised to ensure they do not play with
the appliance.
8. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
9. The maximum continuous operating time of the blender is one
minute only. Do not exceed this maximum operating time, as it
may cause damage to the unit.
10. To protect against electric shock, do not immerse the base in
water or any other liquid.
11. Extreme caution must be exercised when using an appliance
containing hot liquid in the blender, as it can be ejected due to
sudden steaming.
12. The use of accessories or equipment not supplied by the
manufacturer may cause damage or malfunction of your
appliance or result in injuries.
-1-
TROUBLE SHOOTING
REMINDER: Please do not forget to register your
product warranty through the warranty registration
website at
https://imarex.ph
tributed By: Evergood Unlimited Corp.
901 G.Masangkay St., Manila
Made in China
-6-
PROBLEM
CAUSE
SOLUTION
Motor not
working
1. The convenience
outlet is not working.
2. The unit is
damaged.
1. Check if the outlet
the unit is plugged into
is working.
2. Inspect the unit for
any visible damage.
3. If the issue persists,
bring the unit to the
nearest Authorized
Imarex Service
Center.
Motor stop during
operation
1. Overload protection
has been activated.
1. Unplug the unit and
allow it to rest for at
least 1 minute.
Smoke and burnt
smell occurred
1. The unit is being
used for the rst time.
1. This is normal
during the rst use.
Leak on the
bottom of the jar
1. The rubber packing
is not installed
properly.
2. The rubber is
damaged.
1. Turn o the unit,
remove the jar, and
check the rubber
packing. Reassemble
the unit properly.
2. Replace the rubber
with a new one.
3. If the issue persists,
bring the unit to the
nearest Authorized
Imarex Service
Center.
Attachment not
functioning
1. The attachment is
not properly installed.
1. Turn o the unit,
check the attachment,
and ensure it is
correctly assembled.


Produkt Specifikationer

Mærke: Imarflex
Kategori: Blender
Model: IB-655GC

Har du brug for hjælp?

Hvis du har brug for hjælp til Imarflex IB-655GC stil et spørgsmål nedenfor, og andre brugere vil svare dig




Blender Imarflex Manualer

Imarflex

Imarflex ICB-640G Manual

4 September 2024
Imarflex

Imarflex ICB-500B Manual

4 September 2024
Imarflex

Imarflex ICB-500A Manual

4 September 2024
Imarflex

Imarflex ICB-500C Manual

4 September 2024
Imarflex

Imarflex ICB-500 Manual

4 September 2024
Imarflex

Imarflex ICB-450GS Manual

4 September 2024
Imarflex

Imarflex ICB-1900PRO Manual

4 September 2024
Imarflex

Imarflex ICB-1550PRO Manual

4 September 2024

Blender Manualer

Nyeste Blender Manualer