Impact VE-TTLFT Manual

Impact Lys VE-TTLFT

Læs gratis den danske manual til Impact VE-TTLFT (1 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Impact VE-TTLFT, eller vil du spørge andre brugere om produktet?

Side 1/1
Replacing the Flashtube
1. Turn off the power, remove the battery, and wait at least 10
minutes for the ashtube to cool.
2. Remove the glass cover by gently pulling it off of the ash head.
3. Using white cotton gloves or a clean cloth, remove the
retention wire wrapped around the top of the ashtube.
4. Once the wire is unwrapped, grip the base of the ashtube on
each side, and carefully pull it from the retaining sockets.
push the pins of the new ashtube into the sockets.
6. With gloved ngers, wrap the retention wire over and around
the ashtube.
7. Replace the glass cover.
Impact VE-TTLFT Replacement Flash Tube for Venture TTL 600 Monolight
Warning: Do not touch the ashtube with bare hands — wear
cotton cloth gloves or use a cotton cloth to handle the ashtube.
GG1


Produkt Specifikationer

Mærke: Impact
Kategori: Lys
Model: VE-TTLFT

Har du brug for hjælp?

Hvis du har brug for hjælp til Impact VE-TTLFT stil et spørgsmål nedenfor, og andre brugere vil svare dig