Vaxcel Canton C0270 Manual

Vaxcel Lys Canton C0270

Læs gratis den danske manual til Vaxcel Canton C0270 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel Canton C0270, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Page 1 of 2

Installation Steps

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

C0270

Hardware Package (included):

Bolt Nut (D)

Mounting Screw (B)

Mounting Strap Unit (A)

Wire Connector (C)

Outlet Box

House Ground Wire

Wire Connector (C)

Lock Nut

Mounting Strap (A)

Green Ground Screw

Mounting Screw (B)

Fixture Wire

Fixture Mounting Screw

Fixture Ground Wire

Canopy

Bolt Nut (D)

Max. 60W Medium

Base Bulb (not included)

Attach the

mounting strap unit (A)

to outlet box by using two

mounting screws

(B)

Note: The depth of fixture mounting screw on the mounting

strap unit may need to be adjusted to properly fit the fixture.

. Pull out the source wires from the outlet box. Make wire

connections using wire connectors (C) as follows:

• Connect the hot wire (black insulation) from the

fixture to the black wire from the power source.

• Connect the neutral wire (white insulation) from

the fixture to the white wire from the power source.

• Attach the fixture ground wire (bare wire) to the mounting

strap unit (A) with the green ground screw. Then, depending

on local code, then connect it to the house ground wire with the

wire connector (C).

Carefully put all of the wires back into the outlet box.

3. Attach the canopy to the mounting strap unit (A) by inserting the fixture

mounting screw, then secure it with two bolt nuts (D).

4. Install 1 x 60W medium base bulb (not included). See relamping label at socket area or packaging for

maximum wattage allowed.

Turn off the power at fuse or circuit box.

Turn on the power at fuse or circuit box.

220704

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Lys
Model:	Canton C0270

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Canton C0270 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Vaxcel Manualer

Vaxcel Grant P0289 Manual

21 December 2025

Vaxcel Alto C0218 Manual

21 December 2025

Vaxcel Canton C0270 Manual

21 December 2025

Vaxcel W0493 Manual

21 December 2025

Vaxcel P0105 Manual

21 December 2025

Vaxcel Orbit C0268 Manual

21 December 2025

Vaxcel Monrovia CF35417 Manual

21 December 2025

Vaxcel Keenan P0193 Manual

21 December 2025

Vaxcel Briar W0474 Manual

21 December 2025

Vaxcel Huntley P0402 Manual

21 December 2025

Lys Manualer

Nyeste Lys Manualer

Alora Marcel EW464002 Manual

21 December 2025

Bellevue Novo VXP49432ORB Manual

21 December 2025

Progress Lighting P500508 Manual

21 December 2025

Progress Lighting P3053 Manual

21 December 2025

Bellevue Kash VXCF80058NB Manual

21 December 2025

Progress Lighting P300431 Manual

21 December 2025

Progress Lighting P3573 Manual

21 December 2025

NUVO 62/1467 Manual

21 December 2025

Progress Lighting P2804 Manual

21 December 2025

Forte Lighting 5745-02 Manual

21 December 2025