Ingenuity Summer Pop N’ Jump Manual

Ingenuity Legetøj Summer Pop N’ Jump

Læs gratis den danske manual til Ingenuity Summer Pop N’ Jump (6 sider) i kategorien Legetøj. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Ingenuity Summer Pop N’ Jump, eller vil du spørge andre brugere om produktet?

Side 1/6
Pop N’ Jump
®
INSTRUCTION MANUAL
13744
Please read the following instructions and
warnings carefully before assembly and each use.
KEEP THIS INSTRUCTION MANUAL
FOR FUTURE REFERENCE.
No tools required.
For technical support, contact us at 1-401-671-6551
or www.summerinfant.com/contact
For use with children from 6 - 12 months.
Adult assembly required.
USE ONLY FOR A CHILD:
Who is able to hold head and neck upright unassisted.
Who is not able to walk or climb out of product.
Who weighs less than 25 lbs. (11.3 kg) and
is less than 30 inches (76 cm) in height.
to store (continued):
Grasp two
opposing
corners & push
closed!
Slide into
bag!
Pull seat pad
up off hook and
loop tabs!
Colors and styles may vary.
MADE IN CHINA.
8/19
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-401-671-6551
© 2019 Summer Infant (USA), Inc.
remove seat pad:
We're here to help! If you have questions or need assistance,
please contact our Consumer Relations Team at or 1-401-671-6551 www.summerinfant.com/contact
www.summerinfant.com
23
cleaning and maintenance:
4
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges.
DO NOT use if any parts are missing or broken.
• Never use this product if there are any loose or missing fasteners, loose joints, broken parts or torn mesh/fabric. Check product before assembly
and periodically during use. Contact Summer Infant if any of these conditions are observed.
• Wipe clean with a damp cloth or sponge, using mild soap and warm water to clean. Towel or air dry.
• Removable Seat: machine wash with like colors using mild soap. Tumble dry low.
push lock
out then
pull up
to unlock
frame!
Push lock
out then
pull up
to unlock
frame!
WARNING
FALL HAZARD
• Babies can FALL from product resulting in head
injuries.
• NEVER leave child unattended. ALWAYS keep child
in view while in product.
• NEVER use near stairs, ovens, space heaters,
replaces, swimming pools or any other object
which may injure your child.
To avoid tip over, place product on a at, level
surface.
• NEVER lift and/or carry child in product.
• Use only for child who is able to hold head and
neck upright unassisted and who is not able to
walk or climb out of product.
• ALWAYS ensure both locks are secure before
placing child in product and check security of
both locks before each use.
• ALWAYS install fabric seat insert prior to placing child
in product.
• NEVER adjust seat while child is in product.
• Never try to spin child in fabric seat.
• DO NOT attempt to remove fabric oor.
• DO NOT use the product if it is damaged or broken.
STRANGULATION HAZARD
• Strings can cause STRANGULATION.
• DO NOT place items with a string around childs neck,
such as hood strings or pacier cords.
• DO NOT suspend strings over product or attach strings
to toys.
replacement part: 13744-01 canopy
13744-02 book
13744-03 lollipop
13744-04 popsicle
13744-05 candy toy
13744-06 fabric seat
13744-07 carry bag
1
2
FINISHED!
Pop 'n Jump
Canopy
Travel Bag
(replacement part # 13410-01)
A
A
B
B
C
Toys
D
C D
components:
2
assembly:
Press
downward
to fully
expand frame!
Grasp two
opposing corners
& pull open!
Press locks
down to lock
frame! (2 places)
Remove
contents from
bag!
attach canopy:
x2
x2
3
12
IMPORTANT: Check security of both locks before each use.
!
Hint: Adjust canopy for maximum
coverage by gently pulling top of
canopy forward so top/sides are
fully extended!
!
IMPORTANT: Before assembly and each use,
inspect this product for damaged hardware,
loose joints, missing parts, or sharp edges. DO
NOT use if any parts are missing or broken.
3
adjust seat height:
to store:
Unsnap
canopy! Twist and fold
canopy!
x4
1st
2
nd
1
!
Initial setting out of package is to the
lowest position. Place child in seat.
Check distance between child’s feet and
oor. Child’s toes should touch oor
(without bouncing). If child is standing at
footed or toes are not touching oor, adjust
height to any of the three positions (low for
smallest child and high for tallest child).
!
MIDDLE
HIGH
press!press!
press!press!
LOW
x4
1
Remove child from seat before adjusting
height! Unlock 2 places, turn product upside
down, and rest on oor for easy adjustment.
!
2
Before adjusting height, release snaps on
corners of fabric oor (snaps only needed in
low position)!
!
3
Adjust to desired height (low, middle,
high) by pressing lock pin fasteners
inward and adjusting frame!
!
4
WARNING
NEVER adjust seat
while child is in product.
!
IMPORTANT: Ensure lock pin fasteners
are properly engaged (8 places). All
fasteners must be adjusted to the same
position. Relock frame (2 places).
push lock
out then
pull up
to unlock
frame!
push lock
out then
pull up
to unlock
frame!
snap!
snap!snap!
snap!snap!
snap!snap!


Produkt Specifikationer

Mærke: Ingenuity
Kategori: Legetøj
Model: Summer Pop N’ Jump

Har du brug for hjælp?

Hvis du har brug for hjælp til Ingenuity Summer Pop N’ Jump stil et spørgsmål nedenfor, og andre brugere vil svare dig