Insignia NS-S10CCBK Manual

Insignia Papirhugger NS-S10CCBK

Læs gratis den danske manual til Insignia NS-S10CCBK (2 sider) i kategorien Papirhugger. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Insignia NS-S10CCBK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Overheat Door open

PowerOverload

FWD REV

OFFAUTO

Switch

LED indicators

SETTING UP YOUR SHREDDER

1 Place the wastebasket upright on a level surface.

2 Attach the shredder head to the basket. Make sure that it

ts properly.

3 Place the wastebasket securely in the shredder.

Note: Do not use plastic bags to line the wastebasket.

4 Connect the power cord to a power outlet. Do not use an

extension cord.

USING YOUR SHREDDER

1 Unpack your shredder, then place it upright on a level

surface.

2 Make sure that the shredder head is correctly tted onto

the basket.

3 Plug the power cord into a standard (120 V AC) outlet. Do

not use an extension cord.

4 Slide the power switch to AUTO.

5 Insert paper (up to 10 pages) or one credit card or disc into

the shredding slot. Your shredder automatically shreds

what you insert.

Note: Don’t put envelopes, adhesive material, newsprint,

transparencies, laminated documents, continuous forms,

cardboard, or hard and plastic materials (except credit cards)

through the shredder. You can shred small staples and small

paper clips.

6 If the shredder jams, slide the switch to REV to return the

paper, then slide the switch to . The shredder can be AUTO

used again if the jam is cleared.

7 When the wastebasket is 2/3 full, slide the switch to OFF,

unplug the cord from the power outlet, then lift up and

empty the wastebasket.

PACKAGE CONTENTS

• Cross cut shredder with wastebasket

• Quick Setup Guide

FEATURES

• Shreds up to 10 sheets of paper at one time

• Destroys credit cards, compact discs, small staples, and

small paper clips

• Cross-cut size .2 × 1.4 in. (4 × 35 mm) protects sensitive

data

• 5.6 gal (21 L) capacity basket holds shredded waste and is

easy to empty

Before using your new product, please read these instructions to prevent any damage.

QUICK SETUP GUIDE

10-sheet Cross Cut

Shredder

NS-S10CCBK / NS-S10CCBK-C

# ITEM

1 Handle

2 Switch

3 LED

indicators

4 Shredding

slot

5 Window

6 Wastebasket

DESCRIPTION

Lets you easily lift up the shredder head

to empty the paper inside the waste

basket. Make sure that your shredder is

turned o before you move it.

FWD: Sends an item through your

shredder. The POWER indicator lights

green.

Note: When you slide the power switch to

FWD, the cutters run forward continuously.

To stop the cutters, you have to move the

switch to a dierent position.

We recommend that you only use FWD to

make sure that the remaining paper in slot

gets shredded or you want you clear the slot.

AUTO: Automatically shreds an item

when inserted into the shredding slot.

The POWER indicator lights green. After

shredding, the shredding stops

automatically.

OFF: Turns o your shredder.

REV: Reverses the paper in the slot to

clear a jam or remove unshredded paper.

Overheat: Lights when your shredder

has overheated. If this indicator is on, the

machine stops shredding, and recovers

when the indicator is o. The cool down

time is at least 30 minutes.

Overload: Lights when trying to shred

over the maximum 10 sheets or when

the paper is folded. In overload, the

cutter turns o automatically.

Power: Lights when your shredder is in

use.

Door open: Lights when the shredder

head is not on the wastebasket or when

the head is not in the correct position on

the wastebasket.

Insert up to 10 sheets of paper at a time

or one credit card or disc at a time.

Lets you see how much shredded

material is in the wastebasket.

Holds the paper, cards, and discs that

you have shredded. Empty the basket

when it is 2/3 full.

AUTO

REV

TROUBLESHOOTING

My shredder isn’t working

• Make sure that the power cord is plugged into a working power

outlet. If the power cord is damaged, replace it.

• Make sure that the shredder head and wastebasket are positioned

correctly.

• If the Overheat indicator is on, let it cool at least 30 minutes. When

the indicator is o, you can use your shredder again,

• Change the position of the paper as you insert it.

• The paper may be too thin or crumpled for your shredder to

recognize it. Fold the paper, then reinsert it.

• Slide the switch to FWD.

• Make sure that you only send 10 sheets of paper, one credit card,

or one disc through your shredder at a time.

My shredder is jammed

• Slide the switch to , remove the paper from the cutter, then REV

slide the switch to AUTO, and try again.

The cutter won’t stop

• Slide the switch to , unplug your shredder from the power OFF

outlet, then push the shredded paper down to make sure that it is

away from the shredder head.

• Slide the switch to REV to remove extra paper, disc, or credit card

from your shredder.

My shredder is too noisy

• Make sure that your shredder is on a at, level surface.

• Make sure that the shredder head and wastebasket are positioned

correctly.

The Overheat indicator is lit.

• Let your shredder cool at least 30 minutes. When the indicator

turns o, you can use your shredder again.

The Overload indicator is lit.

• Make sure that you haven’t put too much paper into your

shredder at one time. Slide the switch to REV, remove the paper

from the cutter, then try again with less paper.

SPECIFICATIONS

• Dimensions: 12.7 × 8.3 × 16.8 in.

(32.2 × 21.2 × 42.6 cm)

• Cutting style: Cross cut

• Entry width: 8.6 in. (22 cm)

• Shred capacity: 10 sheets (75 g/m2 A4 paper)

1 disc or credit card

• .2 × 1.4 in. (4 × 35 mm)Shred size:

• Shred speed: 3 m/1 min.

• Duty cycle: 3 mins ON / 30 mins OFF

• Input: AC 120 V, 60 Hz, 4.5 A

• Net weight: 12 lbs. (5.5 kg)

• Basket capacity: 5.6 gal (21 L)

LEGAL NOTICES

FCC statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3(B)/NMB-3(B)

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada) or

01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

V2 ENGLISH 20-0106

IMPORTANT SAFETY INFORMATION

Please read thoroughly

Before using the shredder, please read the guide and become familiar with the safety

information, operating instructions, and maintenance requirements. Following all warnings

and instructions in the guide and as marked on the shredder. Do not attempt to service this unit

by yourself. Doing so will void the manufacturer’s warranty and may expose you to sharp

cutting blades and/or high voltage electric shock that could cause serious injury. Any repairs

must be performed by qualied service personnel.

11. Keep in the OFF position when the shredder is not in use for prolonged periods of time.

12. Empty wastebasket frequently.

13. The document shredder must always be deactivated and disconnected from the electrical

line prior to moving, transporting and cleaning the device and prior to emptying the waste

basket.

14. The device may not be operated with a damaged power cord.

15. For indoor use only.

16. To protect the machine well, we suggest the user to operate it in this way: work 3 minutes

then rest 30 minutes.

17. The machine allowed max shred 10 sheets paper (75gsm) or 1 credit card

or 1 CD at one time.

18. The socket-outlet must be installed near the equipment and must be easily accessible

during use.

1. Read

instructions

before use

3. Avoid

touching the

document feed

opening with

hands

5. Product is not

intended for use

by children

(product is not

toy)

4. Do not spray or keep any

aerosol products in or around

shredder

2. Avoid loose

clothing or

jewelry touching

the document

feed opening

7. Shredder

oil only

6. Avoid

getting hair

near the

document

feed opening

8. Sharp edges,

do not touch

9. This equipment is not

intended for use by children.

Avoid touching the media feed

opening with the hands,

clothing or hair. Unplug this

equipment when not in use of

an extended period of time.

10. Warning!

Before switching

the machine on,

make sure that

you observe all

safety

instructions

Produkt Specifikationer

Mærke:	Insignia
Kategori:	Papirhugger
Model:	NS-S10CCBK

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-S10CCBK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Papirhugger Insignia Manualer

Insignia NS-S10CCBK Manual

11 Marts 2025

Papirhugger Manualer

Nyeste Papirhugger Manualer

Fellowes LX50 Manual

30 Juli 2025

Biltema 24-846 Manual

25 Juli 2025

Biltema 24-845 Manual

24 Juli 2025

GBC CX30-55 Manual

24 Juli 2025

GBC CM15-30 Manual

23 Juli 2025

GBC CHS10-30 Manual

23 Juli 2025

Natec Beaver Home NSH-1316 Manual

15 Juli 2025

Adler AD 1039 Manual

5 Juli 2025

Adler AD 1037 Manual

5 Juli 2025

Adler AD 1040 Manual

5 Juli 2025