Insignia NS-S10MCBK2 Manual

Insignia Papirhugger NS-S10MCBK2

Læs gratis den danske manual til Insignia NS-S10MCBK2 (2 sider) i kategorien Papirhugger. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Insignia NS-S10MCBK2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

LED indicators

Buttons

Door openOverload

Overheat

Rev Fwd

Auto

SETTING UP YOUR SHREDDER

1 Push the wheel casters into the holes on the bottom of your shredder.

The wheels with the brake levers go into the front holes.

2 Place the wastebasket upright on a level surface.

3 Lock the wheel brakes (press the levers down with your foot) to keep

your shredder from moving.

Note: Your shredder must be at least 2 in. (5 cm) from any walls for ventilation

purposes.

4 Attach the shredder head to the basket. Make sure that it ts correctly.

5 Place the wastebasket securely in the shredder.

Note: Do not use plastic bags to line the wastebasket.

6 Connect the power cord to a power outlet. Do not use an extension

cord.

USING YOUR SHREDDER

1 Turn the shredder on by pressing the POWER switch on the back of the

unit to I.

2 Press the Auto button to turn on auto mode, the Auto button is blue

when activated.

3 Insert up to 10 sheets of paper or one credit card at a time into the

shredding slot. Your shredder automatically shreds what you insert.

Note: Don’t put envelopes, adhesive material, newsprint, transparencies,

laminated documents, continuous forms, cardboard, or hard plastic materials

(except credit cards) through the shredder. You can shred small staples and small

paper clips, if they are attached to the paper you are shredding.

4 If the shredder jams, press Rev to reverse the paper, then press the Auto

button. The shredder will operate normally again when the jam is

cleared.

5 When the wastebasket is 2/3 full, move the power button to O, unplug

the cord from the power outlet, then pull-out and empty the

wastebasket.

Note: For best performance, we recommend that you shred for 15 minutes, then

let your shredder cool for 20 minutes.

PACKAGE CONTENTS

• Micro cut shredder with wastebasket

• Quick Setup Guide

FEATURES

• Shreds up to 10 sheets of paper at one time

• Destroys credit cards, compact discs, small staples, and small paper clips

• Micro-cut size .16 × .5 in. (4 × 12 mm) protects sensitive data

• 5.3 gal (20 l) capacity wastebasket holds shredded waste and is easy to

empty

Before using your new product, please read these instructions to prevent any damage.

QUICK SETUP GUIDE

10-Sheet Micro

Cut Shredder

NS-S10MCBK2 / NS-S10MCBK2-C

# ITEM

1 Shredding slot

2 Shredding slot (CD/DVD)

3 LED indicators

4 Button panel

5 Handles

6 Window

7 Wastebasket

8 Wheels

9 POWER switch

DESCRIPTION

Insert up to 10 sheets of paper or one credit card at a time.

Insert one credit card or one disc at a time.

Overload: Lights when trying to shred over the maximum 10

sheets or when the paper is folded. When overloaded, the cutter

turns o automatically.

Overheat: Lights when your shredder has overheated. When

overheated, the shredder stops shredding. After 20 minutes, the

indicator turns o and the shredder can shred again.

Door open: Lights when the shredder head is not on the

wastebasket or when the head is not in the correct position on the

wastebasket.

Rev: Press to reverse the shredder for ve seconds. Press and hold

to reverse the shredder until you release the button. Reverses the

paper in the slot to clear a jam or remove unshredded paper.

Auto: Automatically shreds an item when inserted into the

shredding slot. The POWER indicator lights blue. After shredding,

the shredding stops automatically.

The Auto indicator lights solid blue, then turns o when

shredding is complete.

Fwd: Press to shred for ve seconds. Press and hold to shred until

you release the button.

Note: When you press Fwd, the AUTO LED indicator will ash blue. Use

Fwd to make sure that the remaining paper in the slot gets shredded or

to clear the slot.

Let you easily lift up the shredder head to empty the paper inside

the wastebasket. Make sure that your shredder is turned o

before you move your shredder.

Lets you see how much shredded material is in the wastebasket.

Holds the paper, cards, and discs that you have shredded. Empty

the wastebasket when it is 2/3 full (to the top of the window).

Let you move your shredder to a new location. The brakes on the

front wheels prevent your shredder from moving.

Turns your shredder on and o. Located on the back of the

shredder.

Auto

Rev

Produkt Specifikationer

Mærke:	Insignia
Kategori:	Papirhugger
Model:	NS-S10MCBK2

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-S10MCBK2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Papirhugger Insignia Manualer

Insignia NS-S6CCBK2 Manual

1 Oktober 2025

Insignia NS-PS10MC Manual

30 September 2025

Insignia NS-S10MCBK2 Manual

29 September 2025

Insignia NS-S10CCBK Manual

11 Marts 2025

Papirhugger Manualer

Nyeste Papirhugger Manualer

Hama Safe Auto M1200 Manual

30 November 2025

Hama Prime M100 Manual

29 November 2025

Hama Prime M50CD Manual

29 November 2025

Rexel Promax QS RES1123 Manual

14 November 2025

Rexel RLWM26 Manual

13 November 2025

SEM 5140C/4 Manual

13 November 2025

Rexel ProStyle+ 5 Manual

13 November 2025

HP AF1512 Manual

10 November 2025

Rexel Momentum P420+ Manual

8 November 2025

Rexel Momentum Extra XP422+ Manual

7 November 2025