Integra DHC-80.6 Manual

Integra Modtager DHC-80.6

Læs gratis den danske manual til Integra DHC-80.6 (107 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Integra DHC-80.6, eller vil du spørge andre brugere om produktet?

Side 1/107
CONTENTS
AM/FM Radio Receiving Function 2
Tuning into a Radio Station 2
Registering an AM/FM Radio Station 3
Using RDS (Australian and Asian models) 3
Playing Content from a USB Storage Device 5
Listening to Internet Radio 6
About Internet Radio 6
TuneIn 6
Pandora®–Getting Started (U.S., Australia and
New Zealand only) 7
SiriusXM Internet Radio (North American only) 8
Slacker Personal Radio (North American only) 9
Registering Other Internet Radios 10
DLNA Music Streaming 12
About DLNA 12
Configuring the Windows Media® Player 12
DLNA Playback 12
Controlling Remote Playback from a PC 13
Music Streaming from a Shared Folder 14
About Shared Folder 14
Setting PC 14
Playing from a Shared Folder 14
Using Remote Controller for Playing Music Files 16
About the Remote Controller 16
Remote Controller Buttons 16
Icons Displayed during Playback 16
Using the Listening Modes 17
Selecting Listening Mode 17
Contents of Listening Modes 18
Checking the Input Format 21
Advanced Settings 22
How to Set 22
1.Input/Output Assign 23
2.Speaker Setup 26
3.Audio Adjust 33
4.Source Setup 35
5.Listening Mode Preset 39
6.Miscellaneous 40
7.Hardware Setup 50
8.Remote Controller Setup 55
9.Lock Setup 55
Operating Other Components with the Remote
Controller 56
Functions of Remote Mode Buttons 56
Programming Remote Control Codes 56
TV Operation 57
Blu-ray Disc Player/DVD Player/DVD Recorder
Operation 58
VCR/PVR Operation 58
Satellite Receiver/Cable Receiver Operation 59
CD Player Operation 59
Cassette Tape Deck Operation 59
To Operate CEC-compatible Components 60
Assigning Another Device's Remote Controller
Functions to the Unit's Remote Controller 60
Assigning an Operation Sequence to the Remote
Controller (Macro Function) 60
Advanced Speaker Connection 63
Bi-Amping 63
Connecting Dipole Speakers 63
Connecting and Operating Onkyo RI Components 64
About RI Function 64
RI Connection and Setting 64
iPod/iPhone Operation 65
Control Function between the Unit and External
Component 66
Firmware Update 67
About Firmware Update 67
Updating the Firmware via Network 67
Updating the Firmware via USB 68
Troubleshooting 70
Reference Information 76
E
n
DHC-80.6
Advanced Manual
AM/FM Radio Receiving Function
2
AM/FM Radio Receiving Function
Tuning into a Radio Station
Tuning into stations automatically
1. Press Tuner on the main unit several times to select
either "AM" or "FM".
2. Press Tuning Mode so that the "AUTO" indicator on the
display lights.
3. Press Tuning to start automatic tuning.
 Searching automatically stops when a station is
found. When tuned into a radio station, the "
TUNED " indicator on the display lights. If FM stereo
broadcasting is tuned, the "FM STEREO" indicator
lights.
 No sound is output while the " TUNED " indicator
is off.
When the signal from an FM radio station is weak:
Radio wave may be weak depending on the building
structure and environmental conditions. In that case,
manually tune into the radio station of your choice by
referring to the next section.
Tuning into stations manually
1. Press Tuner on the main unit several times to select
either "AM" or "FM".
2. Press Tuning Mode so that the "AUTO" indicator on the
display goes off.
3. Press Tuning to select the desired radio station.
 The frequency changes by 1 step each time
you press the button. The frequency changes
continuously if the button is held down and stops
when the button is released. Tune by looking at the
display.
To return the display to "AUTO": Press Tuning Mode
on the main unit again. A station is automatically tuned.
Normally "AUTO" should be displayed.
Tuning into stations by frequency
It allows you to directly enter the frequency of the radio
station you want to listen to.
1. Press Tuner on the remote controller several times to
select either "AM" or "FM".
2. Press D.TUN.
3. Using the number buttons, enter the frequency of the
radio station within 8 seconds.
 To enter 87.5 (FM), for example, press 8, 7, 5, or 8,
7, 5, 0. If you entered a wrong number, press D.TUN
and enter a correct one.


Produkt Specifikationer

Mærke: Integra
Kategori: Modtager
Model: DHC-80.6

Har du brug for hjælp?

Hvis du har brug for hjælp til Integra DHC-80.6 stil et spørgsmål nedenfor, og andre brugere vil svare dig