Intel X25-M SATA II SSD Manual

Intel Solid State-drev (ssd) X25-M SATA II SSD

Læs gratis den danske manual til Intel X25-M SATA II SSD (24 sider) i kategorien Solid State-drev (ssd). Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Intel X25-M SATA II SSD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Order Number: 319984-003US

January 2009

Intel® X25-E SATA Solid State Drive

SSDSA2SH032G1, SSDSA2SH064G1

Product Manual

 Available in 2.5” Form Factor

 Capacity: 32 GB, 64 GB

 Uses Intel NAND flash memory Single Level

Cell (SLC) components

 Bandwidth Performance Specifications

— Sustained Sequential Read: up to 250 MB/s

— Sustained Sequential Write: up to 170 MB/s

 Read and Write IOPS Specifications

(IOmeter Queue Depth 32)

— Random 4 KB Reads: 35 K IOPS

— Random 4 KB Writes: 3.3 K IOPS

 Compatibility

— Intel® Matrix Storage Manager

— SATA Revision 2.6 compliant, compatible

with SATA 1.5 Gb/s and 3 Gb/s interface

rates

— ATA/ATAPI-7 Compliant

— SSD Enhanced SMART ATA feature set

— Native Command Queuing (NCQ) command

 Compliance

— UL*

— CE*

— C-Tick*

— BSMI*

— MIC*

— Microsoft* WHQL

— RoHS*

 Power Management

— 5 V SATA Supply Rail

— Supports ATA Power Management and

Advanced Power Management Specifications

— SATA Interface Power Management

— OS-Aware Hot Plug/Removal

 Power Specifications

— Active: 2.4/2.6 W (32 GB/64 GB) TYP

— Idle: .060 W TYP

 Temperature

— Operating: 0o C to 70o C

— Non-Operating: -55o C to 95o C

 Reliability

— Bit Error Rate (BER): 1 sector per 1015 bits

read

— Mean Time Between Failures (MTBF)

2,000,000 Hours

— Write Endurance: 1 petabyte of random

writes

 Shock

— Operating and Non-operating: 1,000G/0.5

msec

 Vibration

— Operating: 2.17 G (7-800 Hz)

— Non-operating 3.13 G (10-500 Hz)

 Weight:

— 80 +/- 2 grams (32 GB)

— 90 +/- 2 grams (64 GB)

(2.5” 7 mm Form Factors)

Intel® X25-E SATA Solid State Drive

Product Manual January 2009

2 Order Number: 319984-003US

Legal Lines and Disclaim ers

Ordering Information

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS

OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING

TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,

MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for

use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.

Intel may make changes to specifications and product descriptions at any time, without notice.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the

presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel

or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for

future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any

means without the express written consent of Intel Corporation.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents

which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting

Intel's website at http://www.intel.com.

Intel and Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.