Intellinet 509107 Manual

Intellinet Ikke kategoriseret 509107

Læs gratis den danske manual til Intellinet 509107 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Intellinet 509107, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Industrial

Gigabit Media

Converter

and PoE++

Injector Instructions

Model 509107

(

IMCI-SFPG-90W

)

or go to: register.intellinet-network.com/r/509107

Important: Read before use. • Importante: Leer antes de usar.

For additional benets:

Scan to

product warranty

Features

• One 10/100/1000 RJ45 port supporting a maximum distance of 100 m (300 ft.)

• One SFP port for 1000Base-X optical transceiver modules and distances up to 120 km (75 mi.)

• Power over Ethernet injector function with output up to 90 watts

• IP30 slim-type metal housing to withstand harsh industrial conditions

• Option for DIN-rail installation

• One DC input (44 - 57 V) with terminal block

For specifications, visit intellinetnetwork.com. Register your product at

Placement

Desktop Installation

Prior to use, place/position the device:

• on a level surface that can support the device, with at least 25 mm (approx. 1”) of clearance for ventilation;

• away from sources of electrical noise: radios, transmitters, broadband amplifiers;

• within 100 m (approx. 328’) of RJ45 network devices it’s to be connected to.

DIN-Rail Installation

1 Angle spring of mounting clip over top lip of DIN rail.

2 Push device down till clip clicks onto rail.

3 Ensure installation is stable.

Power

Chassis Ground Column

Located on the side of the power supply connector, a grounding terminal connector is used to provide proper

grounding for your switch. It should be wired to an object that provides earth ground.

Terminal Block Installation (DC Input 44 - 57 V)

NOTE: Ensure all power is off/disconnected before beginning! The wire gauge for the terminal block should be

in the range between 12 – 24 AWG. It is recommended to use a cable with a current capacity of more than 6 A.

1 Loosen appropriate screws. Insert bare power-supply wires into appropriate terminals (positive wire into

positive [V+] terminal, negative wire into negative [V–] terminal, ground wire to ground [

] terminal).

2 Tighten appropriate screws to secure wires.

3 Install block into the device.

V+ V–

Instructions

English

Produkt Specifikationer

Mærke:	Intellinet
Kategori:	Ikke kategoriseret
Model:	509107

Har du brug for hjælp?

Hvis du har brug for hjælp til Intellinet 509107 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Intellinet Manualer

Intellinet 713191 Manual

31 Juli 2025

Intellinet 712996 Manual

31 Juli 2025

Intellinet 561730 Manual

31 Juli 2025

Intellinet 713078 Manual

31 Juli 2025

Intellinet 715768 Manual

30 Juli 2025

Intellinet 713153 Manual

30 Juli 2025

Intellinet 713160 Manual

30 Juli 2025

Intellinet 712958 Manual

30 Juli 2025

Intellinet 712965 Manual

30 Juli 2025

Intellinet 713139 Manual

30 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

RGV AF-XXL Manual

24 August 2025

Candy TX60PET 011 Manual

24 August 2025

Deye SUN1000G3-EU-230 Manual

24 August 2025

Deye SUN-4K-G Manual

24 August 2025

Candy HWP 49AMBCR/1-S Manual

24 August 2025

Revitive Pro Health 5572AQ Manual

24 August 2025

Vonroc GS501XX Manual

24 August 2025

Candy NRE H10A2TCBEXSS Manual

24 August 2025

Candy H5WPB69AMBC/1-S Manual

24 August 2025

Vonroc S2_CF501DC Manual

24 August 2025