Intellinet 560962 Manual

Intellinet Ikke kategoriseret 560962

Læs gratis den danske manual til Intellinet 560962 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Intellinet 560962, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Important: Read before use. • Importante: Leer antes de usar.

Gigabit High-

Power PoE+

Extender Repeater

Instructions

Model 560962-v2

(

IPE-IND

)

For additional benets:

or go to: register.intellinet-network.com/r/560962

Scan to

product warranty

This guide presents the basic steps to set up and operate this device.

For specifications, visit . Register your product at intellinetnetwork.com

Connections

Setup is quick and easy!

1 Plug a Cat5e/6 Ethernet cable — up to 100 m long — from your powered source device (for

example, a PoE injector or switch) into the PoE In connector on the extender/repeater.

2 Plug a second Cat5e/6 Ethernet cable — also up to 100 m long — from the

device you want to transmit power and data to (for example, a PoE network

camera ) into the PoE Out connector on the extender/repeater.

The LED chart below explains how you can tell if your connections are good.

LED Color Status Operation

PoE Yellow

On Port is linked to a PSE/PoE device.

Off No PSE/PoE device is linked.

Data Green

On Valid port connection.

Blinking Data transmitted/received.

Off No link established.

The distance chart below explains how much power you can expect to

be delivered to your PoE device based on how many extender/repeaters

you connect in series (5 is the maximum recommended).

Number of Extenders Distance Max. wattage of powered device

1200 m (656 ft.) 24.592

2300 m (984 ft.) 20.140

3400 m (1,312 ft.) 16.176

4500 m (1,640 ft.) 12.56

5600 m (1,968 ft.) 8.60

Functionality

This extender/repeater supports the IEEE 802.3at protocol and is designed to work with all

IEEE 802.3af- or IEEE 802.3at-compliant devices. : If your connected device is not PoE Note

compliant, this extender/repeater can still be used to extend data-only transmission distances.

The two holes on the base of the housing allow you to screw the extender/

repeater in place to help maintain secure cable connections.

English

Gigabit High-Power PoE+ Extender RepeaterInstructions

Produkt Specifikationer

Mærke:	Intellinet
Kategori:	Ikke kategoriseret
Model:	560962
Bredde:	31 mm
Dybde:	102.8 mm
Højde:	20 mm
Vægt:	100 g
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	183 g
Ethernet LAN-porte (RJ-45):	2
Driftstemperatur (T-T):	-10 - 50 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Husmateriale:	Metal
Udgangseffekt:	24.6 W
Certificering:	FCC Class A, CE, UKCA, NDAA
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85044095
Strøm over Ethernet (PoE):	Ja
Maksimal driftstilstand:	500 m
Ethernet-grænsefladetype:	Gigabit Ethernet
Antal produkter inkluderet:	1 stk
Understøttede kabeltyper:	Cat5, Cat5e
Power over Ethernet (PoE) spænding:	48 V