Intellinet 560993 Manual

Intellinet Ikke kategoriseret 560993

Læs gratis den danske manual til Intellinet 560993 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Intellinet 560993, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

16-PORT

GIGABIT ETHERNET

PoE+ SWITCH

INSTRUCTIONS

MODEL 560993

INT-560993-QIG-ML1-0415-01

Important: Read before use. • Importante: Leer antes de usar.

intellinetnetwork.com

ENGLISH

16-Port Gigabit Ethernet PoE+ Switch English

Thank you for purchasing the Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+

Switch, Model 560993. For speciﬁcations, go to intellinetnetwork.com.

CONNECTIONS & INDICATORS

LEDs

The LED indicators — Power,

PoE, Link/Activity — make it

easier to monitor the switch

and its connections. NOTE:

All ports provide power to a

connected device, and all

connected devices should

comply with IEEE 802.3af.

Ports

All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and

uplink ports are not needed for connections to PCs, routers, hubs, other switches, etc.

Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate

a link or activity, check the corresponding device for proper setup and operation.

Power

Use the included power cord to connect the device (on the rear panel) to an AC outlet.

Conﬁrm that the power LED on the front panel is lit.

INSTALLATION

Prior to use, it is recommended that the switch be placed/positioned:

• onalevelsurfacewithatleast25mm(approx.1”)ofclearanceforventilation;

• awayfromsourcesofelectricalnoise:radios,transmitters,broadbandampliers,etc.;

• within100m(approx.328’)ofnetworkdevicesit’stobeconnectedto.

Rackmount

The switch includes brackets and screws for optional rack mounting.

1. Disconnect any cables from the switch.

2. Position a bracket over the mounting holes on one side of the switch and secure it

in place with screws.

3. Repeat Step 2 on the other side of the switch.

4. Position the switch in the rack and screw the brackets to the rack.

5. Reconnect any cables.

LED Status Operation

Power On Power on

Oﬀ Check the AC connection; turn the power on

PoE On Port is linked to a PSE/PoE device

Oﬀ No PSE/PoE device is linked

Link/Act On Valid connection: orange = 10/100M; green = 1000M

Blinking Valid port connection; data transmitted/received

Oﬀ No link established

1 3 5 7

2 4 6 8

2 4 6 8 10 12 14 16

1 3 5 7 9 11 13 15

PWR

LNK/ACT/Speed

PoE in Use

Produkt Specifikationer

Mærke:	Intellinet
Kategori:	Ikke kategoriseret
Model:	560993
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	442 mm
Dybde:	208 mm
Højde:	44 mm
Vægt:	3800 g
Brugervejledning:	Ja
Produktfarve:	Sort
Formfaktor:	1U
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 40 °C
Husmateriale:	Metal
Kabler inkluderet:	Vekselstrøm
Certificering:	FCC Class B, VCCI Class A, CE, RoHS
Strømforbrug (maks.):	260 W
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ja
Switch-type:	Ikke administreret
Switch lag:	L2
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 100BASE-TX, 1000BASE-T
Basis omskiftning RJ-45 Ethernet porte, antal:	16
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Opbevar-og-frem:	Ja
MAC adresselabel:	8192 entries
Switch kapacitet:	32 Gbit/sek.
Stativ-montering:	Ja
Strømbeskyttelsesfunktioner:	Over voltage, Overload, Short circuit
Gigabit Ethernet (kobber) porte, antal:	16
Bufferstørrelse:	256 KB
Hastighed for videresendelse:	1.488 Mpps
Rack monteringskit:	Ja
Understøttede kabeltyper:	Cat3, Cat4, Cat5, Cat5e