Intellinet 561044 Manual

Intellinet Ikke kategoriseret 561044

Læs gratis den danske manual til Intellinet 561044 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Intellinet 561044, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

GIGABIT

ETHERNET

SWITCH

WITH 2 SFP PORTS

INSTRUCTIONS

MODEL 561044

INT-561044-QIG-ML1-0815-01

Important: Read before use. • Importante: Leer antes de usar.

intellinetnetwork.com

ENGLISH

Gigabit Ethernet Switch English

Off

CONNECTIONS & INDICATORS

LEDs

The LED indicators —

Power, 1000M, Link/

Activity — make it easier

monitor the switch

and its connections.

Ports

All ports on the switch

support Auto-MDI/

MDI-X functionality, so

crossover cables and uplink ports are not needed for connections to PCs, hubs,

routers, other switches, etc. Cat5/5e/6 UTP/STP cables provide optimal

performance; if a status LED doesn’t indicate a link or activity, check the

corresponding device for proper setup and operation.

Power

Use the included power cord to connect the device (on the rear panel) to an AC

outlet. Conﬁrm that the power LED on the front panel is lit.

INSTALLATION

The switch includes brackets and screws for optional rack mounting:

1. Disconnect any cables from the switch.

2. Position a bracket over the mounting holes on one side of the switch and

secure it in place with screws (Page 11).

3. Repeat Step 2 on the other side of the switch.

4. Position the switch in the rack and screw the brackets to the rack.

5. Reconnect any cables.

Prior to use, it is recommended that the switch be placed/positioned on a level

surface with at least 25 mm (approx. 1”) of clearance for ventilation; away from

sources of electrical noise: radios, transmitters, broadband ampliﬁers, etc.; and

within 100 m (approx. 328’) of network devices it’s to be connected to.

For speciﬁcations, go to intellinetnetwork.com.

LED Status Operation

Power On Power on

Oﬀ Check the AC connection; turn the power on

1000M On Port is linked to a 1000 Mbps device

Oﬀ Port is linked to a 10/100 Mbps device; or no

device is linked

Link/Act On Valid port connection

& SFP Blinking Valid port connection; data transmitted/

received

Oﬀ No link established

Power

Link/Act

1000M

4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

3 5 7 9 11 13 15 17 19 21 23

Produkt Specifikationer

Mærke:	Intellinet
Kategori:	Ikke kategoriseret
Model:	561044
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	440 mm
Dybde:	208 mm
Højde:	44 mm
Vægt:	3000 g
Brugervejledning:	Ja
Produktfarve:	Sort
Formfaktor:	1U
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 40 °C
Husmateriale:	Metal
Kabler inkluderet:	Vekselstrøm
Strømkilde:	Vekselstrøm
Certificering:	FCC Class A, CE
Strømforbrug (maks.):	20 W
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ingen
Monteringsbeslag inkluderet:	Ja
Switch-type:	Ikke administreret
Switch lag:	L2
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Auto-sensing:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 100BASE-TX, 1000BASE-T
Basis omskiftning RJ-45 Ethernet porte, antal:	24
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Opbevar-og-frem:	Ja
MAC adresselabel:	8192 entries
Switch kapacitet:	52 Gbit/sek.
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Stativ-montering:	Ja
Antal SFP modulslots:	2
Gigabit Ethernet (kobber) porte, antal:	24
Bufferstørrelse:	512 KB
MAC-adresse auto-indlæring understøttet:	Ja
MAC-adresse auto-forældelse understøttet:	Ja
Auto-forhandling:	Ja
Hastighed for videresendelse:	1.488 Mpps
Rack monteringskit:	Ja
Understøttede kabeltyper:	Cat3, Cat4, Cat5, Cat5e