Intellinet 561068 Manual

Intellinet Ikke kategoriseret 561068

Læs gratis den danske manual til Intellinet 561068 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Intellinet 561068, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

GIGABIT

ETHERNET

SWITCH

INSTRUCTIONS

MODEL 561068

INT-561068-QIG-ML1-0815-01

Important: Read before use. • Importante: Leer antes de usar.

intellinetnetwork.com

ENGLISH

Gigabit Ethernet Switch English

CONNECTIONS & INDICATORS

LEDs

The LED indicators — Power, Link/

Activity — make it easier to monitor

the switch and its connections.

Ports

All ports on the switch support

Auto-MDI/MDI-X functionality, so

crossover cables and uplink ports are not needed for connections to

PCs, routers, other switches, etc. Cat5/5e/6 UTP/STP cables provide

optimal

performance; if a status LED doesn’t indicate a link or activity,

check the

corresponding device for proper setup and operation.

Power

Use the included power cord to connect the device (on the rear panel)

to an AC outlet. Conﬁrm that the power LED on the front panel is lit.

INSTALLATION

The switch includes brackets and screws for optional rack mounting:

1. Disconnect any cables from the switch.

2. Position a bracket over the mounting holes on one side of the switch

and secure it in place with screws (Page 11).

3. Repeat Step 2 on the other side of the switch.

4. Position the switch in the rack and screw the brackets to the rack.

5. Reconnect any cables.

Prior to use, it is recommended that the switch be placed/positioned

on a level surface with at least 25 mm (approx. 1”) of clearance for

ventilation; away from sources of electrical noise: radios, transmitters,

broadband ampliﬁers, etc.; and within 100 m (approx. 328’) of network

devices it’s to be connected to.

For speciﬁcations, go to intellinetnetwork.com.

LNK/ACT

1 2 3 4

PWR

9 10 11 12

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

LED Status Operation

PWR On Power on

Oﬀ Check the AC connection;

turn the power on

LNK/ACT On Valid port connection

Blinking Valid port connection; data

transmitted/received

Oﬀ No link established

Produkt Specifikationer

Mærke:	Intellinet
Kategori:	Ikke kategoriseret
Model:	561068
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	215 mm
Dybde:	133 mm
Højde:	44 mm
Vægt:	940 g
Brugervejledning:	Ja
Produktfarve:	Sort
Formfaktor:	1U
Opbevaringstemperatur (T-T):	-20 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 40 °C
Husmateriale:	Metal
Kabler inkluderet:	Vekselstrøm
Certificering:	FCC Class A, CE
Strømforbrug (maks.):	9.1 W
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ingen
Switch-type:	Ikke administreret
Switch lag:	L2
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Auto-sensing:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 100BASE-TX, 1000BASE-T
Basis omskiftning RJ-45 Ethernet porte, antal:	16
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Opbevar-og-frem:	Ja
MAC adresselabel:	8192 entries
Switch kapacitet:	32 Gbit/sek.
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Stativ-montering:	Ja
Gigabit Ethernet (kobber) porte, antal:	16
MAC-adresse auto-indlæring understøttet:	Ja
MAC-adresse auto-forældelse understøttet:	Ja
Auto-forhandling:	Ja
Hastighed for videresendelse:	1.488 Mpps
Rack monteringskit:	Ja
Understøttede kabeltyper:	Cat3, Cat4, Cat5, Cat5e