Intermatic FM1SWUZ Manual

Intermatic Ikke kategoriseret FM1SWUZ

Læs gratis den danske manual til Intermatic FM1SWUZ (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Intermatic FM1SWUZ, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
FM/1 Series
Time Switches
TECHNICAL DATA
Supply Voltage: Synchronous: 24, 120 and
240VAC, 60Hz
Quartz: 24V AC/DC, 120 and
240VAC 50/60 Hz
Switch Type: SPDT
Switch Rating: 21A @ 250VAC resistive
1HP @ 125VAC
2HP @ 240VAC
Ambient
Temp. Range: –40°F to 180°F, synchronous units
–20°F to 140°F, quartz units
Terminals: 1/4” spade terminals
Reserve Carryover:
7 days for quartz units
Weight: Approximately 3 oz.
Agency Approvals: UL Recognized
NOTE: 24V quartz unit will operate on 6VDC, 12VDC,
or 24VDC
APPLICATIONS
The FM/1 series of time switches are designed for control of
heating, ventilating, air conditioning, refrigeration, lighting,
security, circulating pumps, spas or any electrical load requir-
ing 24-hour or 7-day scheduling.
WIRING
Verify input voltage stated on back of unit. Use 1/4” quick
connects and make connections in accordance with the wir-
ing diagram shown and applicable code requirements. When
using 24V units, it is important to use transformers that will
supply the required 24 volts AC to terminals 1 & 2.
MOUNTING
The standard FM/1 units can be flush mounted (mounting kit
with screws available) or surface mounted inside a panel.
A printed circuit board mounting base is also available.
An indoor or outdoor enclosure is available for stand-alone
mounting. In addition, unit is also available in DIN housing for
flush or surface mounting (see MIL72, Digi 20 or Digi 42 data
sheets). Optional clear plastic dust cover is available.
Terminal Connections
Contacts shown in “Off” position (trippers pushed inward)
“On” position (trippers pushed outward) will close contacts 3 & 4
45 3
1
M
INPUT
COM
NO
NC
2
TIME SETTING
TO SET THE CURRENT TIME (AND DAY OF
WEEK ON 7 DAY UNITS), TURN THE MINUTE
HAND CLOCKWISE. DO NOT SET THE TIME BY
ROTATING “OUTER” DIAL.
Turn the minute hand clockwise until the day of the week
(7-day timer) and the time of day on the outer dial is
aligned with the triangle marker on the inner dial (two
o’clock position).
Example for 7-day program dial Monday 10:30 AM. Turn the
minute hand clockwise until Monday 10:30 AM is aligned
with the triangle on the inner dial. The hour and minute hand
will show exactly 10:30.
Example for 24-hour program dial 10:30 AM. Turn the
minute hand clockwise until 10:30 AM is aligned with the
triangle on the inner dial. The hour and the minute dial will
show exactly 10:30.
PROGRAMMING
7-Day (SW, QRW Models)
The weekly program dial reflects the seven days of the week
and AM/PM imprints for each day.
The time switch is programmed by pushing the captive trip-
pers to the outer ring position for the entire period that the
load is to be turned “ON”, i.e., two hours for each tripper on
the 7-Day dial. When the tripper is pushed to the inside, the
switch is in the “OFF” position.
24-Hour (ST, QRT Models)
The 24-Hour dial has quarter-hour divisions and AM/PM
indications.
The time switch is programmed by pushing the captive trip-
pers to the outer ring position for the entire period that the
load is to be turned “ON”, i.e., fifteen minutes for each trip-
per on the 24-Hour dial. When the tripper is pushed to the
inside, the switch is in the “OFF” position.
PROGRAMMING WITH MANUAL
OVERRIDE SWITCH
AUTOMATIC MODE
In order to operate the time switch module in the automatic
mode, the manual switch must be in the center position (auto-
matic) - see diagram.
MANUAL MODE
With the manual switch selector lever the selected programs
can be overridden. In the lower position, marked “O”, termi-
nals 3 and 5 are permanently closed. In the upper position,
marked “I”, terminals 3 and 4 are permanently closed (see
diagram).
158--00524
Override Mode
3-way manual
override switch
I = permanent ON
= automatic
0 = permanent OFF
Dimensions
FM/1 synchronous/quartz
INTERMATIC INCORPORATED
Spring Grove, IL 60081-9698
www.intermatic.com

Produkt Specifikationer

Mærke: Intermatic
Kategori: Ikke kategoriseret
Model: FM1SWUZ

Har du brug for hjælp?

Hvis du har brug for hjælp til Intermatic FM1SWUZ stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Intermatic Manualer

Intermatic

Intermatic ET2805C Manual

6 Juli 2025
Intermatic

Intermatic FM1STUZ-24U Manual

6 Juli 2025
Intermatic

Intermatic FM1D20-LV Manual

6 Juli 2025
Intermatic

Intermatic ET2745CP Manual

6 Juli 2025
Intermatic

Intermatic ET2805CP Manual

6 Juli 2025
Intermatic

Intermatic ET2145CR Manual

6 Juli 2025
Intermatic

Intermatic FM1QTUZ-240U Manual

6 Juli 2025
Intermatic

Intermatic ET2715C Manual

5 Juli 2025
Intermatic

Intermatic FM1D20A Manual

5 Juli 2025
Intermatic

Intermatic ET2125CP Manual

5 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Yamazen

Yamazen RS-14734CJH Manual

11 Juli 2025
Prima

Prima Prostate Test-PSA Manual

11 Juli 2025
Yamazen

Yamazen NUMF-E306 Manual

11 Juli 2025
Philips

Philips Sonicare 5500 Series HX7111 Manual

11 Juli 2025
Microchip

Microchip USB5926C Manual

11 Juli 2025
Yamazen

Yamazen MNR-12874CJ Manual

11 Juli 2025
Yamazen

Yamazen YWC-193SFK Manual

11 Juli 2025
Blustream

Blustream AD11AU Manual

11 Juli 2025
RGBlink

RGBlink Q16pro Manual

11 Juli 2025
Yamazen

Yamazen CV-1825 Manual

11 Juli 2025