ION Air Pro Manual

ION Sportscam Air Pro

Læs gratis den danske manual til ION Air Pro (3 sider) i kategorien Sportscam. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 4 anmeldelser. Har du et spørgsmål om ION Air Pro, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Thank you for purchasing the HD sports video camera. ion AIR PRO The ion

AIR PRO can be mounted with the Bike & Helmet Kit or the BOARD Kit

for the ultimate adventure HD recording experience.

Getting to know your AIR PRO camera

 AIR PRO is a Professional, High Quality Digital Video Recorder that

records in Full HD video by using an easy slide switch

 It also has the latest 5 Mega Pixel Sensor for you to take great digital

photographs

Your camera supports a MicroSD card up to 32GB, which allows you to

take video in 1080p with 30 frames per second for about 4 Hours.

 The embedded can be recharged quickly.1200mAh Li-ion Battery

The Waterproof Housing lets the camera perform up to 10 meters under

water.

 AIR PRO is lighter than 4.5 ounces or 123g.

1. Getting to Know Your Camera

1Power 1. Turn the camera on or off

2. Take single photograph

2 LED indicator Show the camera status

3Recording Slide

Switch Slide to start or stop video recording

4 Lens High quality lens

5 MicroSD card slot MicroSD card storage location.

6 AV port Connect the camera to TV via Composite cable

7 Mini HDMI Port Connect the camera to TV via HDMI cable

8Video Resolution

Switch Select video resolution: FHD (Full HD) or HD.

9USB Port

1. Connect to computer for data transfer or

camera setup

2. Charge your camera

10 Reset button Reset the camera

11 PODZ Socket Connect PODZ to the camera to achieve

additional function

2. Using Your Camera

2.1 Charging up Your Camera

Charge your camera with either the USB cable or AC/DC adapter. The red LED lights up

to indicate the camera is charging and turns off as soon as the camera has been fully

charged. It takes about 3 hours to fully charge the camera.

2.2 Inserting a Memory Card

Insert a MicroSD card (not included) before using your camera. Assure that the camera

power is turned OFF before inserting the card to the slot.

Notes

1. There is only one correct direction to insert the MicroSD card into the slot. Do not force

the card into the card slot as it may damage both the camera and the MicroSD card.

2. A new MicroSD card should be formatted before using. For more information, please

see section 3.1 and 3.2

2.3 Set up Date and Time

Connect your camera to a computer and run the ion software from the MicroSD card

folder. You can set date and time on the camera through the settings page. Please see

section 3.1 to open ion software

2.4 Recording Video

Before starting recording, select the video resolution by switching the Video Resolution

Switch

There are two methods available for starting the video record function. When starting a

video recording, a short vibration indicates recording started. The LED indicator

illuminates RED throughout the recording.

1. Whether the camera power is ON or OFF, simply slide the Recording Slide Switch

from STOP to REC to start recording.

2. When your camera is OFF and the Recording Slide Switch is at REC location,

press and hold the Power button to turn the camera ON and it will start recording.

Move the Recording Slide Switch from REC to STOP to stop recording. The

camera will vibrate and the LED indicator will illuminate GREEN to indicate the recording

has stopped. The camera will then enter Standby mode.

An additional option is to hold the Power button to stop the recording and turn the

camera off. The camera will vibrate two seconds and the Green LED light will turn off.

Notes

1. An additional WQVGA (432x240) video file will be created simultaneously with the

recording of an HD/FHD video file. The smaller WQVGA file size allows for more efficient

uploading of content to social media sites and email.

2. Changing video resolution is disabled during video recording.

3. There will be around 1-2 seconds delay before the camera starts recording.

4. The various video resolution options for HD and FHD can be changed under the

“Settings” selection in the ion software.

2.5 Taking Photos

1. Turn on the camera by pressing the Power button.

2. After the camera power has been turned on, press the Power button to take a

photo. A short vibration and a flash of Green LED indicate the action was successful.

Notes

1.The Still Photo function is disabled during video recording.

Quick Start Guide

Produkt Specifikationer

Mærke:	ION
Kategori:	Sportscam
Model:	Air Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til ION Air Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sportscam ION Manualer

ION Air Pro Manual

7 Juli 2024

ION Air Pro WiFi Manual

26 November 2022

Sportscam Manualer

Nyeste Sportscam Manualer

Andersson ANC 2.0 Manual

3 Oktober 2025

Insta360 One X2 Manual

25 September 2025

Insta360 Pro 2 Manual

25 September 2025

Lamax X5.2 Manual

19 September 2025

Explore Scientific Explore One Star JR Manual

5 September 2025

Insta360 X4 Manual

30 August 2025

Moza Moin Manual

29 August 2025

Easypix GoXtreme Omni 360° Manual

27 August 2025

GoXtreme Black Hawk+ Manual

26 August 2025

GoXtreme Black Manta Manual

26 August 2025