IOptron ICam 462C Manual

IOptron Kamera ICam 462C

Læs gratis den danske manual til IOptron ICam 462C (7 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om IOptron ICam 462C, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
iOptron Corporation 6E Gill Street, Woburn, MA 01801 |
iOptron Planetary Camera Manual
iCAM462C
Product # 3372
Ver. 1.00 2021.12
from those described in this instruction manual.
2
Product Descripon
iCAM462C camera uses Sony IMX462 color sensor. The imaging area is 1/2 9um pixel size, a .8”, with 2.
2.1MP resoluon (1944*1096) and diagonal of 6.5 mm.
iCAM462C camera has a very high sensivity. It is an idea camera for planetary imaging. The camera has
a very low readout noise. The tesng results indicated that the readout noise is as low as 0.73e at a gain
of 350 and around 0.7e at a gain of 400. The camera has a unique DPS (Dead Pixel Suppression)
technology to eliminate the any abnormal/dead pixel by analyzing camera dark frames. The camera has
a unique HCG mode, which will automacally turn on when the camera gain seng is ≥ 80. The HCG
mode can greatly reduce the readout noise and retain the same high dynamic range as it at low gain.
Due to its unique QE response, the sensivity reaches the peak at 800-850nm. An IR850 or CH4 lter can
be used with the camera for infrared imaging.
When the camera is connected to the USB3.0 interface and full-resoluon preview is used, it can reach
136 fps in RAW8 mode (10bit ADC). During image recording, the actual recording speed is affected by
the hard drive wring speed. It is recommended to use a high-quality solid state drive to record data to
realize the full benet of the USB3.0 data speed. The ST-4 guiding port allows one to connect the camera
to a mount GUIDE port for ST-4 autoguiding.
Package Contents
iCAM Camera 462C
USB 3.0 cable
ST-4 guiding cable
Online Contents
This Manual
Camera driver
ASCOM driver
System Requirement
Windows 7/8/10 is supported
Linux and Mac OS will be supported soon.
Driver Installaon
1. Download iCAM/PlayerOne camera driver. Save in a folder or desktop.
2. DO NOT connect the camera to the computer yet. Double click on downloaded driver to
enter installaon page.

Produkt Specifikationer

Mærke: IOptron
Kategori: Kamera
Model: ICam 462C

Har du brug for hjælp?

Hvis du har brug for hjælp til IOptron ICam 462C stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kamera IOptron Manualer

IOptron

IOptron ICam 462C Manual

25 December 2024
IOptron

IOptron ICam 464C Manual

25 December 2024
IOptron

IOptron ICam 178M Manual

1 September 2024
IOptron

IOptron iE5100 Manual

1 September 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB

IMILAB C22 Manual

9 Juni 2025
Overmax

Overmax Camspot 4.8 Manual

9 Juni 2025
Overmax

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025
Vemer

Vemer EasyEye.NOW Manual

2 April 2025
Rollei

Rollei HD-30 Manual

29 Marts 2025
Rollei

Rollei Security Cam 1080p Manual

29 Marts 2025
Aida

Aida HD-NDI-X20 Manual

27 Marts 2025
Hasselblad

Hasselblad CFV II 50c Manual

27 Marts 2025
Marshall Electronics

Marshall Electronics CV228 Manual

12 Marts 2025
AViPAS

AViPAS AV-1180 Manual

12 Marts 2025