IOptron ICam 464C Manual

IOptron Kamera ICam 464C

Læs gratis den danske manual til IOptron ICam 464C (7 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 20 anmeldelser. Har du et spørgsmål om IOptron ICam 464C, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
iOptron Corporation 6E Gill Street, Woburn, MA 01801 |
iOptron Planetary Camera Manual
iCAM464C
Product # 3373
Ver. 1.00 2021.12
iOptron reserves the rights to revise this instruction without notice. Actual color/contents/design/function of a product may dier
from those described in this instruction manual.
2
Product Descripon
iCAM464C camera uses a Sony IMX464 color sensor. The imaging area is 1/1 9um pixel size, .8”, with 2.
4.2MP resoluon (2712*1538) and diagonal of 9mm.
iCAM464C camera has a very high sensivity. It is an idea camera for planetary imaging. The camera has
a very low readout noise. The tesng results indicated that the readout noise is as low as 0.75e at a gain
of 350 and around 0.71e at a gain of 400 The camera has a unique DPS (Dead Pixel Suppression) .
technology to eliminate the any abnormal/dead pixel by analyzing camera dark frames. The camera has
a unique HCG mode, which will automacally turn on when the camera gain seng is 80. The HCG ≥
mode can greatly reduce the readout noise and retain the same high dynamic range as it at low gain.
Due to its unique QE response, the sensivity reaches the ak at 800-850nm. An IR850 or CH4 lter can pe
be used with the camera for infrared imaging.
When the camera is connected to the USB3.0 interface and full-resoluon preview is used, it can reach
93 fps in RAW8 mode (10bit ADC). During image recording, the actual recording speed is aected by the
hard drive wring speed. It is recommended to use a high-quality solid state drive to record data to
realize the full benet of the USB3.0 data speed. The ST-4 guiding port allows one to connect the camera
to a mount GUIDE port for ST-4 autoguiding.
Package Contents
iCAM Camera 464C
USB 3.0 cable
ST-4 guiding cable
Online Contents
This Manual
Camera driver
ASCOM driver
System Requirement
Windows 7/8/10 is supported
Linux and Mac OS will be supported soon.
Driver Installaon
1. Download iCAM/PlayerOne camera driver. Save in a folder or desktop.
2. DO NOT connect the camera to the computer yet. Double click on downloaded driver to
enter installaon page.

Produkt Specifikationer

Mærke: IOptron
Kategori: Kamera
Model: ICam 464C

Har du brug for hjælp?

Hvis du har brug for hjælp til IOptron ICam 464C stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kamera IOptron Manualer

IOptron

IOptron ICam 462C Manual

25 December 2024
IOptron

IOptron ICam 464C Manual

25 December 2024
IOptron

IOptron ICam 178M Manual

1 September 2024
IOptron

IOptron iE5100 Manual

1 September 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB

IMILAB C22 Manual

9 Juni 2025
Overmax

Overmax Camspot 4.8 Manual

9 Juni 2025
Overmax

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025
Rollei

Rollei HD-30 Manual

29 Marts 2025
Rollei

Rollei Security Cam 1080p Manual

29 Marts 2025
Aida

Aida HD-NDI-X20 Manual

27 Marts 2025
Marshall Electronics

Marshall Electronics CV228 Manual

12 Marts 2025
AViPAS

AViPAS AV-1180 Manual

12 Marts 2025
Fujifilm

Fujifilm FinePix JX500 Manual

14 Januar 2025
Canon

Canon WFT-E9 Manual

13 Januar 2025