Irritrol 100P2-S-KIT Manual

Irritrol Ikke kategoriseret 100P2-S-KIT

Læs gratis den danske manual til Irritrol 100P2-S-KIT (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Irritrol 100P2-S-KIT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
1
100 / 100-S Series Valves
Installation Instruction
100 Series Valve
Built on proven technologies and
components, the Irritrol 100 Series valves
are tough, have excellent performance,
and are extremely reliable. A self-cleaning
metering system and 220 PSI rating
assures years of trouble-free performance.
100S Series “Scrubber” Valve
Constructed of heavy-duty, glass-
reinforced nylon, high grade stainless
steel, brass and EPDM rubber materials,
the 100 Series scrubber valves resist
clogging. The patent-pending continuous
scrubbing mechanism actively ghts dirt,
algae and other particles from disrupting
the functionality of the valve. The 100
Series scrubber valves are true dirty water
irrigation valves, able to handle the harsh
chemicals found in dirty water systems,
such as chlorines, chloramines and water
treated with ozones.
Installation Recommendations
• In commercial installations, it is
advantageous to install the valves in
a valve box. This enables the valve
to be easily located, accessed, and
maintained.
• Partially ll the bottom of the valve
box with clean aggregate to faciliate
drainage.
• Locate the valve box away from
structures, hardscape features (such as
sidewalks), and large planting locations.
• Locate the valve box in shrub beds and
at right angles to structure locations.
• If valves are installed below grade
without
a valve box, access to the top
of the valve should be provided by
using a section of 4” PVC pipe and a
valve cover installed directly over each
valve.
Introduction
100P1
100P1.5
100P2
100P3
2
Features
Specifications
100 Series Valve
• 220 PSI maximum pressure rating
• Removable, self-cleaning metering
system
• Precise pressure control with
optional Omni-Reg® pressure
regulator (eld installed)
• Manual ow control: adjustable to
zero ow
• Internal manual bleed screw:
bleeds internally downstream
• External manual bleed screw:
bleeds to atmosphere, allows
cleaning of metering rod and
provides maximum ushing
100S Series “Scrubber” Valve
• All the great features of the 100
Series valve.
• Continuous scrubbing turbine
actively cleans the metering device
for consistent valve operation in
dirty water applications.
Models:
100/100S Series electric
1”, 1½”, 2”, and 3”
Body Style:
Globe/Angle with female threads (all
models)
BSP threads available
Dimensions:
1”: 6¾” H x 3⅝” W
1½”: 7¼” H x 3” W
2”: 9½” H x 6⅛” W
3”: 10¾” H x 6⅛” W
Flow range: 5 - 300 GPM
Burst pressure safety rating:
450-500 PSI
Operating Pressure:
20-220 PSI maximum
Minimum pressure differential:
20 PSI
(between inlet and outlet)
Solenoid (standard): 24 VAC
Inrush: 0.40 amps, 11.50 VA; Max.
Inrush: 0.50 amps
Holding: 0.20 amps, 5.75 VA; Max.
Holding: 0.30 amps
Voltage Requirement (based on inlet
pressure):
22.5 V a.c. @ 220 PSI
21.1 V a.c. @ 200 PSI
20.2 V a.c. @ 175 PSI
19.1 V a.c. @ 150 PSI
18.2 V a.c. @ 125 PSI
16.1 V a.c. @ 75 PSI
16.0 V a.c. @ 50 PSI
!
Using pipe dope on valve
connections can cause thread
damage and failure of the valve
body.
Use only PTFE tape or pipe
thread sealant.
• Note the ow direction arrows
on the bonnet or body and install
accordingly.
• The valve can be installed at any
angle without affecting operation.
• The valve body plug and o-ring must
be properly installed in the unused
inlet.
• Use direct-burial wire, utilizing
different color codes for each station
control wire and one color for the
common wire to all valves.
• Waterproof wire splice connectors
are absolutely essential for proper
electric control system operation.
Follow the installation instructions
provided with the connectors
for optimum waterproof splice
protection.
• Leaving a wire expansion loop at
each valve location on long-run wire
lengths is recommended.
Installation Guidelines

Produkt Specifikationer

Mærke: Irritrol
Kategori: Ikke kategoriseret
Model: 100P2-S-KIT

Har du brug for hjælp?

Hvis du har brug for hjælp til Irritrol 100P2-S-KIT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Irritrol Manualer

Irritrol

Irritrol 205TF Manual

9 Oktober 2024
Irritrol

Irritrol 700DK-1-LF Manual

6 Oktober 2024
Irritrol

Irritrol 100P1.5-S Manual

20 September 2024
Irritrol

Irritrol 100P1.5-S-KIT Manual

5 September 2024
Irritrol

Irritrol CL-100- Manual

9 August 2024
Irritrol

Irritrol 100P3-S Manual

8 August 2024
Irritrol

Irritrol Titan Manual

4 August 2024
Irritrol

Irritrol DK-LV-MF Manual

2 August 2024
Irritrol

Irritrol 2500SF Manual

1 August 2024
Irritrol

Irritrol 2507DK-LF Manual

31 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MiVue 540 Manual

2 August 2025
Pro User

Pro User PSI2000TX Manual

2 August 2025
Guede

Guede 5T Manual

2 August 2025
Navman

Navman EZY40 Manual

2 August 2025
Thule

Thule Chariot Ski kit Manual

2 August 2025
Hozelock

Hozelock 5102 Manual

2 August 2025
ART

ART 310 Manual

2 August 2025
Gorenje

Gorenje KAS53ZDCINVFT Manual

2 August 2025
Gorenje

Gorenje KAS35ZDCINVFT Manual

2 August 2025
Navman

Navman MY450LMT Manual

2 August 2025