Irritrol 100P3 Manual

Irritrol Ikke kategoriseret 100P3

Læs gratis den danske manual til Irritrol 100P3 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Irritrol 100P3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

100 / 100-S Series Valves

Installation Instruction

100 Series Valve

Built on proven technologies and

components, the Irritrol 100 Series valves

are tough, have excellent performance,

and are extremely reliable. A self-cleaning

metering system and 220 PSI rating

assures years of trouble-free performance.

100S Series “Scrubber” Valve

Constructed of heavy-duty, glass-

reinforced nylon, high grade stainless

steel, brass and EPDM rubber materials,

the 100 Series scrubber valves resist

clogging. The patent-pending continuous

scrubbing mechanism actively ghts dirt,

algae and other particles from disrupting

the functionality of the valve. The 100

Series scrubber valves are true dirty water

irrigation valves, able to handle the harsh

chemicals found in dirty water systems,

such as chlorines, chloramines and water

treated with ozones.

Installation Recommendations

• In commercial installations, it is

advantageous to install the valves in

a valve box. This enables the valve

to be easily located, accessed, and

maintained.

• Partially ll the bottom of the valve

box with clean aggregate to faciliate

drainage.

• Locate the valve box away from

structures, hardscape features (such as

sidewalks), and large planting locations.

• Locate the valve box in shrub beds and

at right angles to structure locations.

• If valves are installed below grade

without

a valve box, access to the top

of the valve should be provided by

using a section of 4” PVC pipe and a

valve cover installed directly over each

valve.

Introduction

100P1

100P1.5

100P2

100P3

Features

Specifications

100 Series Valve

• 220 PSI maximum pressure rating

• Removable, self-cleaning metering

system

• Precise pressure control with

optional Omni-Reg® pressure

regulator (eld installed)

• Manual ow control: adjustable to

zero ow

• Internal manual bleed screw:

bleeds internally downstream

• External manual bleed screw:

bleeds to atmosphere, allows

cleaning of metering rod and

provides maximum ushing

100S Series “Scrubber” Valve

• All the great features of the 100

Series valve.

• Continuous scrubbing turbine

actively cleans the metering device

for consistent valve operation in

dirty water applications.

Models:

100/100S Series electric

1”, 1½”, 2”, and 3”

Body Style:

Globe/Angle with female threads (all

models)

BSP threads available

Dimensions:

1”: 6¾” H x 3⅝” W

1½”: 7¼” H x 3” W

2”: 9½” H x 6⅛” W

3”: 10¾” H x 6⅛” W

Flow range: 5 - 300 GPM

Burst pressure safety rating:

450-500 PSI

Operating Pressure:

20-220 PSI maximum

Minimum pressure differential:

20 PSI

(between inlet and outlet)

Solenoid (standard): 24 VAC

Inrush: 0.40 amps, 11.50 VA; Max.

Inrush: 0.50 amps

Holding: 0.20 amps, 5.75 VA; Max.

Holding: 0.30 amps

Voltage Requirement (based on inlet

pressure):

22.5 V a.c. @ 220 PSI

21.1 V a.c. @ 200 PSI

20.2 V a.c. @ 175 PSI

19.1 V a.c. @ 150 PSI

18.2 V a.c. @ 125 PSI

16.1 V a.c. @ 75 PSI

16.0 V a.c. @ 50 PSI

Using pipe dope on valve

connections can cause thread

damage and failure of the valve

body.

Use only PTFE tape or pipe

thread sealant.

• Note the ow direction arrows

on the bonnet or body and install

accordingly.

• The valve can be installed at any

angle without affecting operation.

• The valve body plug and o-ring must

be properly installed in the unused

inlet.

• Use direct-burial wire, utilizing

different color codes for each station

control wire and one color for the

common wire to all valves.

• Waterproof wire splice connectors

are absolutely essential for proper

electric control system operation.

Follow the installation instructions

provided with the connectors

for optimum waterproof splice

protection.

• Leaving a wire expansion loop at

each valve location on long-run wire

lengths is recommended.

Installation Guidelines

Produkt Specifikationer

Mærke:	Irritrol
Kategori:	Ikke kategoriseret
Model:	100P3

Har du brug for hjælp?

Hvis du har brug for hjælp til Irritrol 100P3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Irritrol Manualer

Irritrol 205TF Manual

9 Oktober 2024

Irritrol 700DK-1-LF Manual

6 Oktober 2024

Irritrol 100P1.5-S Manual

20 September 2024

Irritrol 100P1.5-S-KIT Manual

5 September 2024

Irritrol CL-100- Manual

9 August 2024

Irritrol 100P3-S Manual

8 August 2024

Irritrol Titan Manual

4 August 2024

Irritrol DK-LV-MF Manual

2 August 2024

Irritrol 2500SF Manual

1 August 2024

Irritrol 2507DK-LF Manual

31 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025