Thanks for buying the Jalo smoke alarm. Read all instructions before installing the
smoke alarm, so it will protect your home in the best possible way.
1. POSITIONING THE SMOKE ALARM
Near a wall or corner:
Moist places:
Ventilation ducts:
Dead-air spaces:
Fluorescent lamps:
(1)
(2)
Note: Installation with 3M two-sided tape is not approved according to Great Britain’s LPCB
Alarm mode
Testing: (3)
Silence mode:(3)
Low battery:
4, MAINTENANCE
Error mode:
(see diagram 2.7 on the adjacent page).
If the smoke alarm goes out of order, contact the importer or the manufacturer.
Battery life:(3)
(5)
Recommended battery brands:
Battery replacement:
Warning: Lithium batteries can explode or cause burning if they are installed incorrectly.
Use only recommended battery brands.
Please note that the installation plate will not attach to the smoke alarm if the batteries are
missing or they have been installed incorrectly.
Clean the smoke alarm at least once a year:
(see
diagram 2.7 on the opposite page).
Do not paint or modify the smoke alarm!
Waste handling:
1)
2)
3)
USE & INSTALLATION INSTRUCTIONS KUPU
1.
4.
5.
1. FAST INSTALLATION WITH TWO-SIDED TAPE KUPU
2. INSTALLATION WITH SCREWS KUPU
1. (A).
(B).
2.
(C).
3.
(C).
The installation is now ready.
Test your smoke alarm weekly!
1.
(A)
(B).
2. (D).
3. (E)
5.
4.
(F)
Please note that the installation plate will not
attach to the smoke alarm if the batteries are miss-
ing or they have been installed incorrectly.
6.
(G).
The installation is now ready.
Test your smoke alarm weekly!
7. (Maintenance)
INSTALLATION INSTRUCTIONS KUPU
Copyright 2010 Jalo Helsinki Ltd. All rights reserved. Jalo is a registered trademark of Jalo Helsinki Ltd. RCD 001707050
Position the smoke alarm at
least 50cm or 20 inches from
the nearest wall or corner.
50cm
50cm
PN11308-ENG-CHROME-MANUAL-21022013.indd 1 21.2.2013 11.50
