Jindara Townsend Manual

Jindara Varmeapparat Townsend

Læs gratis den danske manual til Jindara Townsend (8 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Jindara Townsend, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Townsend Freestanding

GPN: 236791

Rev A

Townsend Freestanding

Operation & Installation Instructions

Please keep these instructions for future reference.

1. Subject to clauses 2 & 3 of this warranty, A.F. Gason Pty Ltd ACN 004 667 556 warrants the following components of its heaters against defect in

workmanship and/or materials for the following periods from the date of purchase:

a. The rebox for ten years;

b. The paint nish for a period of 12 months if the purchaser has followed the instructions provided by Gason in the Operation and Installation

Instructions manual; and

c. All other components for 12 months except the glass, re brick lining or bae plates if, in the opinion of Gason, these items have been damaged by

impact.

2. This extended warranty does not apply;

a. If the heater has been purchased from a person who has not been authorised by Gason to sell its products;

b. If, in the opinion of Gason, the heater or any other component has been subject to abuse, misuse, alteration, modication or has not been installed,

operated, or maintained in accordance with the instructions provided by Gason; or,

c. To owners other than the original purchaser.

3. If you believe that the heater you purchased contains a manufacturing defect and you wish to make a claim under this warranty, please contact an

authorised Gason service centre to arrange for an assessment.

4. If, after assessing the heater Gason determines that the heater contains a manufacturing fault, Gason may at its own discretion:

a. Replace the heater;

b. Repair or replace specic components of the heater; or

c. Provide a full refund.

5. Parts replaced under warranty are warranted for the balance of their original warranty period.

6. If, at the discretion of Gason the heater or any parts need to be replaced, serviced or repaired at an authorised Gason service centre, then the person

claiming under this warranty must pay all costs associated with:

a. Returning the heater; and

b. The delivery or collection of any new or repaired heater.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable loss or damage. Your are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount to a major failure.

Any benets you receive under these warranties are in addition to other rights and remedies that you may have as a consumer under law in relation to the

heater to which these warranties relate.

These warranties are given by:

A.F. Gason Pty Ltd

Blake Street

Ararat Vic 3377

Please contact us if you have any queries on:

Phone: 03 9763 3200

or email us via the “Contact Us” section of our website: www.gason.com.au

A.F. Gason Pty.Ltd. reserves the right to modify or alter specications, materials, etc. in the interest of product improvement.

WARRANTY

Townsend Freestanding Townsend Freestanding

!WARNING

READ AND FOLLOW THESE INSTRUCTIONS FULLY AND CAREFULLY

BEFORE INSTALLING AND USING THIS APPLIANCE.

To aid heater installation, remove door, bae system, and rebricks to reduce

overall heater weight. Refer to the set-up section of this manual.

!WARNING

Safety warnings

• A ue re with resulting damage may occur if the appliance is not

installed and maintained as per this booklet.

• Never place combustible materials such as wood, paper or furniture near

the appliance.

• This appliance is designed to burn dry hardwood. Do not burn

rubbish, driftwood, ammable liquids, pressurised canisters, or any

substance containing salt or corrosives.

• This appliance must not be installed and operated in an area where

kerosene, petrol, paint thinners, or other ammable liquid is used or stored.

• The ue system must be inspected and cleaned annually or sooner if

required. Failure to do so could result in excessive build up of creosote

which may result in a ue re, which may damage the ue or cause

damage to your home.

• The surface of the appliance becomes hot during operation. Do not

touch the surface of this appliance. Keep children away from the

appliance during operation. Do not allow anyone to operate this

appliance who is not familiar with this instruction booklet.

!WARNING

Paint curing and care

• Your heater is coated with the best available heat resistant paint. Even

though the paint has been baked after application, it may require further

temperature curing. It may discolour if you overre the heater on its rst

re. Please follow these instructions carefully to ensure the quality of the

paint on your heater is maintained.

• For the rst two or three rings, never exceed Medium air setting and

do not load the re more than half full. Do not use softwood fuel (cut up

pallets etc.) other than for kindling when rst lighting the re.

• Ensure that the lower air slide is fully closed once the re is established

during the curing process.

• On the initial re up you may detect smoke coming from the paint nish,

and from any oils that may be impregnated in the steel of the rebox.

This is normal. It is suggested to well ventilate your home on the initial

re up.

• Do not wipe the heater while the paint is curing. After the paint has

cured, the only maintenance required to maintain the heater’s nish is

to wipe it with a soft cloth (with water if necessary). DO NOT USE ANY

COMMERCIAL CLEANERS OR SOLVENTS ON THE PAINT FINISH.

• We are proud of the presentation of our products. If at any time you need

to freshen up the paint, your local Jindara dealer has touch-up

paint available for purchase.

The heater is painted in Stove Bright Metallic Black - Paint code 6309.

If you have any enquiries, please contact the dealer from whom you purchased your heater.

PLEASE COMPLETE:

Dealer Name:

Dealer Address:

Email: Phone:

1 14

Troubleshooting + Tips

• Sluggish or Lazy Fire

• A sluggish or lazy re can be caused by a number of dierent factors, or a combination of several factors.

• Ensure that the wood you are burning is of good quality, and has been well seasoned to ensure its moisture

content is below 16%. Overly wet wood will cool the re, smoke excessively, and cause your unit to run poorly.

The best way to determine the moisture content of your wood is to use a digital moisture meter. Wood that looks

dry on the outside can still be high in moisture on the inside.

• Ensure that there is not a negative pressure inside your house. Wood burning res consume air as part of the

combustion process. They need a constant supply of air to function correctly. If your home is overly sealed and air

is unable to get to the re as needed, it will create a negative pressure inside the house compared to the outside,

which will cause your re to smoke and run poorly. Running extraction fans in your kitchen or bathroom can also

impact on this in well sealed modern homes. The best way to test for this is to try opening an external door or

window near the heater while it is running, to determine whether it runs better with ready access to outside air.

• Non-standard ue installations can also cause your re to run poorly if not correctly installed. The addition of

bends and elbows in the ue will restrict the ow of ue gases more than normal, meaning that you may need to

t an additional length of ue in order for your heater to draw properly.

• Environmental factors such as consistent wind, structures or vegetation near the ue outlet, or other unforeseen

factors can have a dramatic impact on the performance of your heater. These can usually be overcome by tting

an extra length of ue, or through the tment of a specialty cowl such as a wind chaser or a vertical discharge

cowl.

• Ensure you are putting enough wood in your re. Modern replaces are designed to run hotter and cleaner than

older designs. This means that they perform best when they are well stocked with wood and have a hefty bed

of hot coals. You will become familiar with the unit as you use it, and learn what sort of operation best suits your

needs and wood type. As a general rule it is best to start out by building a big re and then reducing the fuel load

to a level that you nd suitable for your needs. This allows the ue to reach an appropriate operating temperature

for it to draw properly from the beginning, which will promote an active re and good heat output.

Produkt Specifikationer

Mærke:	Jindara
Kategori:	Varmeapparat
Model:	Townsend

Har du brug for hjælp?

Hvis du har brug for hjælp til Jindara Townsend stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Varmeapparat Jindara Manualer

Jindara Kimberley Mk2 Manual

21 August 2024

Jindara Hamersley MK2 Freestanding Manual

20 August 2024

Jindara Tilga Manual

19 August 2024

Jindara Hamersley Mk2 Manual

18 August 2024

Jindara Riverina Manual

16 August 2024

Jindara Mallee Manual

14 August 2024

Jindara Spectre Manual

14 August 2024

Jindara Grange Manual

13 August 2024

Jindara Gawler Manual

11 August 2024

Jindara Sturt Manual

10 August 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

BEKO RHO8323BT Manual

14 Juni 2025

DeWalt DXAM-2260 Manual

14 Juni 2025

AlorAir Zeus 900 Manual

14 Juni 2025

XPower B-55 Manual

14 Juni 2025

XPower B-2 Manual

14 Juni 2025

XPower M-27 Manual

14 Juni 2025

B-Air Vent VP-34 Manual

14 Juni 2025

XPower P-80 Manual

14 Juni 2025

DeLonghi JRE0812 Manual

14 Juni 2025

Aura CF15120B Manual

14 Juni 2025