JL Audio ETXv3 M-MCPv3-DM Manual

JL Audio Grillplade ETXv3 M-MCPv3-DM

Læs gratis den danske manual til JL Audio ETXv3 M-MCPv3-DM (6 sider) i kategorien Grillplade. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om JL Audio ETXv3 M-MCPv3-DM, eller vil du spørge andre brugere om produktet?

Side 1/6
Installation Instructions for
M-MCPv3-DM
D E C K M O U N T I N G F I X T U R E S
FOR ET Xv3 ENCLOSED SPEAKER SYSTEMS
Determine the mounting location of the ETXv3
enclosure. Using the holes in the xture base as a guide,
mark the three hole locations, and carefully drill three
3/16” pilot holes and one 1/2” speaker cable hole.
1
Route the speaker cable exiting the enclosure through
the opening in the other half of the xture, and guide the
tabs into the openings in the xture until ush.
3
Remove the 5/16 - 18 x 1-1/4” socket head cap screw and
5/16” lock washer to separate the two xture halves. Se-
cure the xture base to the mounting surface using three
#14 x 1-1/4” at head sheet metal screws (included).
2
Apply Loctite® red thread-locking compound (included)
to the two 5/16 - 18 - 1-1/8” machine screws (included),
thread them into the xture while rmly pushing the
enclosure and xture together to ensure no gap, and
fully tighten.
4


Produkt Specifikationer

Mærke: JL Audio
Kategori: Grillplade
Model: ETXv3 M-MCPv3-DM

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio ETXv3 M-MCPv3-DM stil et spørgsmål nedenfor, og andre brugere vil svare dig