JL Audio PowerWedge+ Manual

JL Audio Ikke kategoriseret PowerWedge+

Læs gratis den danske manual til JL Audio PowerWedge+ (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om JL Audio PowerWedge+, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Thank you for purchasing a JL Audio amplified subwoofer system for

your automotive sound system.

Your subwoofer system has been designed and manufactured to exacting

standards to provide high-quality sub-bass performance and years of

musical enjoyment in your vehicle. For maximum performance, we

highly recommend that you have your new subwoofer system installed

by an authorized JL Audio retailer. Your authorized retailer has the

necessary training, expertise and installation equipment to ensure

optimum performance from this product. Should you decide to install

your subwoofer system yourself, please take the time to read this manual

thoroughly so as to familiarize yourself with it installation requirements

and setup procedures.

If you have any questions regarding the instructions in this

manual or any aspect of your subwoofer system’s operation, please contact

your authorized JL Audio retailer for assistance. If you need further

assistance, please call the JL Audio Technical Support Department at

(954) 443-1100 during business hours.

OWNER’S MANUAL

MicroSub+ / PowerWedge+

Amplied Subwoofer Systems with DCD™ Amplier Technology

125100

200

Low-Pass

Filter Freq. (Hz )

Turn-On

Mode

Remote

Level

Control

Low-Level Inputs

High-Level

Inputs

FUSE

(30A)

(L ) (R)

Input

Sensitivity

Min. Max.

Signal | DC | Rem 0 | 180 deg.

+12 VDC GND Remote

Output

Polarity

Powe r Conn e ction s

Power

(green)

Protect

(red)

2 JL AUDIO®

INSTALLATION APPLICATIONS

The built-in amplifier used in this subwoofer

system is designed for operation in vehicles

with 12V, negative-ground electrical systems.

Using this product in systems with positive

ground and/or voltages other than 12V

may result in damage to the product and

will void the warranty. This product is not

certified or approved for use in aircraft.

INSTALLATION PROCEDURE/CONNECTIONS

All connections are located on the amplifier

panel of the enclosure. All connections are made

via RCA-type or quick-disconnect plugs, making it

easy to remove the enclosure quickly, anytime you

need additional space in your vehicle.

1. Disconnect the NEGATIVE battery post

connection and secure the disconnected

cable to prevent accidental reconnection

during installation. This is an essential

safety precaution during installation!

2. Run power wire from the battery location to

the amplifier’s “+12 VDC” connection, taking

care to route it in such a way that it will not be

damaged and will not interfere with vehicle

operation. 8 AWG is the recommended

power wire size for this amplifier.

3. An appropriate fuse at the main power

wire to the amplifier is vital for vehicle

safety. This fuse must be installed within 18

inches (45 cm) of the positive (+12V) battery

post connection. If this is the only device

connected to this main wire, use a 30A fuse.

Do not install the fuse until the power wire

has been securely connected to the amplifier.

4. Find a good, solid metal grounding point

close to the amplifier panel and connect the

negative power wire to it using appropriate

hardware. Use the same sized wire used

for the +12V connection, no longer than 36

inches (90 cm) from the amplifier’s ground

(GND) connector to the ground connection

point. 8 AWG is the recommended

ground wire size for this amplifier.

5. Run a wire from the source unit’s positive

(+12V) remote turn-on output to the

amplifier’s “Remote” connection. If your

source unit does not have a dedicated remote

turn-on output, you may elect to use one of

the automatic turn-on options, configured via

the amplifier’s “Turn-On Mode” switch. (See

“Control Panel Settings and Adjustments.”)

6. Signal Input (Low-Level): Connect the

amplifier’s RCA input jacks to the source

unit’s preamp level output jacks. You may

run a stereo or a mono signal into the

SAFETY CONSIDERATIONS

• Install this subwoofer system in a dry, well-

ventilated location that does not interfere

with your vehicle’s safety equipment (air bags,

seat belt systems, ABS brake systems, etc.).

• Securely mount the subwoofer system so

that it does not come loose in the event of

a collision or a sudden jolt to the vehicle.

• Check before drilling to make sure that you

will not be drilling into a gas tank, brake line,

wiring harness or other vital vehicle system.

• Do not run system wiring outside or

underneath the vehicle. This is an

extremely dangerous practice, which

can result in severe damage/injury.

• Protect all system wires from sharp edges by

carefully routing them, tying them down and

using grommets and loom where appropriate.

• Secure all wiring as needed, using cable

ties or wire clamps to protect them

from moving parts and sharp edges.

WHAT’S INCLUDED

(1) Enclosure with subwoofer(s), built-

in DCD™ amplifier and grille(s)

(1) Power Connection plug

(1) High-Level input plug

(1) Fuse

(1) User manual

PRODUCT DESCRIPTION

Enclosed subwoofer system with built-

in DCD™ Class D amplifier and specially

engineered, low-impedance driver(s).

ABOUT DCD™ TECHNOLOGY

JL Audio’s exclusive DCD™ amplifier technology

combines direct power conversion with an ultra-

high current output section and unique low-

impedance drivers to extract maximum power and

efficiency. By directly converting a vehicle’s 12V

supply into speaker power, DCD™ amplifiers are

free of traditional switching power supplies, thus

enabling them to be very compact, while generating

remarkable power output with unprecedented

efficiency (up to 94%). This also permits DCD™

amplifiers to operate at much cooler temperatures

than conventional amplifiers.

WARNING! DCD™ amplified subwoofer

systems use very specific components. Never

use a DCD™ amplifier or its companion

subwoofer(s) with incompatible, non-DCD™

products. Doing so will void the warranty

and may cause severe damage/injury.

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Ikke kategoriseret
Model:	PowerWedge+

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio PowerWedge+ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JL Audio Manualer

JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 Manual

10 Marts 2025

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Manual

30 December 2025

JL Audio Stealthbox SB-F-ESCP/10W1v3 Manual

30 December 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/BK Manual

8 December 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Manual

4 Oktober 2024

JL Audio MBT-RX Manual

3 Oktober 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

29 September 2024

JL Audio MBT-CRXv2 Manual

10 September 2024

JL Audio MBT-RXv2 Manual

4 September 2024

JL Audio MBT-CRXv3 Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025