JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

JL Audio Ikke kategoriseret Stealthbox SB-POL-RZG3/10TW3

Læs gratis den danske manual til JL Audio Stealthbox SB-POL-RZG3/10TW3 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-POL-RZG3/10TW3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

I N S T A L L A T I O N G U I D E

for the

SB-POL-RZG3/10TW3

SKU# 94675

2019 & Up Polaris RZR XP 1000, RZR XP 4 1000,

RZR 900 XC, & RZR 4 900

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULT Y:

ESTIMAT ED TIME:

2 HOUR S

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

Continued on Next Page

OUT

SB-POL-RZG3/10TW3 INSTR_SKU# 011535

I N C LUD E D H A R D W A R E

1 2

Continued on Next Page

Page 2 • JL Audio, Inc., 2019

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.