JL Audio Stealthbox SB-D-MGACAB/10W6v3 Manual

JL Audio Ikke kategoriseret Stealthbox SB-D-MGACAB/10W6v3

Læs gratis den danske manual til JL Audio Stealthbox SB-D-MGACAB/10W6v3 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-D-MGACAB/10W6v3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

INSTALLATION

D I F F I C U L T Y :

I N S T A L L A T I O N G U I D E

for the

SB-D-MGACAB/10W6v3

2006 - Up Dodge Ram Mega Cab Trucks

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized

JL Audio dealer. The installation professionals employed by your dealer have the necessary

tools and experience to disassemble and reassemble your vehicle properly. Also, keep

in mind that your warranty coverage extends to two years if your system is installed

or approved by your authorized JL Audio dealer. If you prefer to perform your own

installation, please read this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove all contents from the rear seating area and fold

down the rear seating.

Open the storage unit that is located between the rear seat

and the rear wall. In this storage unit there is three bolts.

Remove the passenger side bolt.

Continued on Next Page

S T E P 2

Remove the middle bolt.

S T E P 3

Remove the driver’s side bolt.

Remove the storage unit out of the vehicle.

SB-D-MGACAB/10W6v3_INSTR_SKU# 011217

OUT

S T E P 9

Place the Stealthbox® upside down on the folded rear seats.

Back out both socket cup set screws to expose 1-1/5".

With an 1/2" drill bit and drill. Drill through the floor at the

wax squares, using the impressions of the socket cup set

screw as a guide.

Once both holes have been drilled, remove both

wax sqaures.

S T E P 1 1

From under the vehicle, place the supplied fender washers, flat

washers, lock washers and then hex nuts onto each protruding

socket cup set screw and secure. Adjust the amount of

exposed thread on each cup set screw if necessary.

Note: For added protection, it is recommended that

you apply a bead of silicone between the vehicle

and the fender washer. After the bolt assembly is

tightly secured, it is also recommended that vehicle

under-coating material is applied to the exposed

assembly.

S T E P 1 0

Place the Stealthbox® into place. Carefully guiding the socket

cup set screws through the drilled holes.

Run speaker wire from the amplifier location to the enclosure

and attach to the terminal.

Check the woofers for proper operation.

Continued on Next Page

SB-D-MGACAB/10W6v3_INSTR_SKU# 011217

S T E P 7

Thread in the two supplied socket cup set screws to the

bottom of the Stealthbox®. Leaving about 1/4" exposed.

S T E P 6

The 31-3/4" measurement is starting from the middle of the

first wax square to the left, as seen in S T E P 5 & 6 .

Remove the paper backing from the second supplied wax

square. Apply this second wax square 31-3/4" to the left of

the first wax square.

S T E P 5

As in the picture, measure for the exact placement of the

wax square.

Remove the paper backing from one of the supplied wax

squares. Apply the wax square onto the flooring behind the

rear seating on the driver's side.

S T E P 4

Remove the driver’s and passenger’s side folding

floor extensions.

S T E P 8

Position the enclosure and press firmly down. This is to leave

an impression onto the wax squares.

Page 2 • JL Audio, Inc 2014

4-inches

9-1/4-inches

31-3/4-inches

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Ikke kategoriseret
Model:	Stealthbox SB-D-MGACAB/10W6v3

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-D-MGACAB/10W6v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JL Audio Manualer

JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 Manual

10 Marts 2025

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Manual

30 December 2025

JL Audio Stealthbox SB-F-ESCP/10W1v3 Manual

30 December 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/BK Manual

8 December 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Manual

4 Oktober 2024

JL Audio MBT-RX Manual

3 Oktober 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

29 September 2024

JL Audio MBT-CRXv2 Manual

10 September 2024

JL Audio MBT-RXv2 Manual

4 September 2024

JL Audio MBT-CRXv3 Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MY500XT Manual

1 August 2025

Navman FOCUS150 GPS Manual

1 August 2025

Scheppach TW1000 Manual

1 August 2025

Navman MiVue 750 WIFI Manual

1 August 2025

Navman MiVue Drive FHD Manual

1 August 2025

Midea MEC64 Manual

1 August 2025

Navman MY50T Manual

1 August 2025

Navman M100 Manual

1 August 2025

Navman MiVue 770 SAFETY Manual

1 August 2025

Navman MiVue 790 Manual

1 August 2025