JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 Manual

JL Audio Ikke kategoriseret Stealthbox SB-GM-BURBCNSL/10W3v3

Læs gratis den danske manual til JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

➔

Stealthbox®

I N S T A L L A T I O N G U I D E

SB - G M -B U RB C NSL / 1 0 W3 v 2 , J L AU D I O , I n c 2 0 0 5 Sh e e t SK U # 0 1 1 1 6 7 3 /0 8 / 2 0 0 5Pag e 1

for the

SB-GM-BURBSCNSL/10W3v2

(2003-Up Chevrolet Suburban,Tahoe,

Silverado &

GMC Yukon,YukonXL, Sierra with front

bucket seats and center console)

This Stealthbox is a product which

requires professional installation skills and

tools.

Please read this installation guide thor-

oughly before beginning the project. It

will guide you step by step through the

installation. Several of the steps in this

process may require two people to

accomplish.

It is absolutely vital that the enclosure

be properly mounted to the vehicle

according to these instructions. Failure

to mount the enclosure properly pres-

ents two problems: 1) The sub-bass

performance will suffer due to the

movement of the enclosure caused by

the force exerted by the woofer(s) and

2) A loose enclosure presents a serious

safety hazard in the event of a collision

or sudden deceleration.

Please enjoy your JL Audio Stealthbox

responsibly.

Read the instructions completely, before the start of

the install.

This Stealthbox Enclosure install does require per-

manent modification to the OEM inner console.

STEP 1: Engage the emergency brake.

Place the key into the ignition and turn to the accessory posi-

tion.

The shifter and the steering wheel needs to be posi-

tioned all the way down.

Remove the front dash cluster panel, by pulling the dash trim

towards you and work around the diameter. Be careful not to

damage the four way light push button, located on top of the

steering column.

Once the trim is removed. Place the transmission into park,

remove the key from the ignition and pop the emergency brake.

STEP 2: Moving down to the top portion of the

center console. Pull the upper storage pocket panel

out and disconnect the electrical outlets.

STEP 3: Pull the cup holders up and out of the

center console.

STEP 4: On the upper lip of the main storage

bucket, remove all the screws, including the storage

lid’s screws.

STEP 5: To remove the main storage bucket,

remove the rubber mat.This will expose the four

screws that need to be removed.

Once all these screws have been removed. Remove

the storage bucket by lifting up and out of the con-

sole.

START

HERE

Continued on Next Page ➔

w w w . j l a u d i o . c o m

➔

➔ ➔

➔ ➔ ➔

STEP 6: To remove the front bucket seats, you

use a 15mm socket(not supplied) for the front nuts

and a 12mm(not supplied) for the rear bolts.

Tilt the seats backward to access and discon-

nect the wiring.This does include the air bag

wire.

STEP 10: To remove the OEM console, lift up on

the rear of the console and pull it back away from

the dash.

Cont.

From

Page

Continued on Next Page ➔

➔

STEP 7: Once the front seats have been

removed, you will need to outline the outside of

the center console with masking tape(not supplied).

This will help in future steps.

STEP 11: *TRUCKS ONLY*

With the console out, there is duct work that is exposed from under the dash. Remove the plastic duct that is attached to

the upper duct work. With the lower duct piece removed, it now exposes a door.

Insert the key into the ignition, turn to the accessory position, turn on the A/C. When the A/C is turned on, this willalloe the

exposed door to open.

This door is opened by a C-bracket that comes down from the upper dash.This C-bracket needs to be removed. If this

bracket is not removed, the A/C air flow will be not be correct.

This C-bracket is attached to the door and a motor that us located in the upper dash. Push the C-bracket to the passenger

side of the truck.This will detach the bracket from the door.With the C-bracket in hand, reach up as far up on the bracket

and push towards the passenger side of the truck.This will detach the C-bracket from the motor. Give the C-bracket to the

owner of the truck or store inside the truck for safe keeping.This bar will need to be reinstalled, If the Stealthbox is removed

and air flow is needed to the rear vents.

Use a small screw(not supplied) to hold this door shut. If this door is not screwed shut, air will blow on the driver’s feet and

reduce pressure from the dash vents.

➔

STEP 8: With the upper storage pocket panel

removed.You can view a pair of bolts. Using a 10mm

socket(not supplied), remove these bolts.

If you have not removed th front seats, there are

other bolts and screws that need to be located and

removed.This is to allow the console to be removed

out of the vehicle.

STEP 9: Look down in the console from the cup

holder area.You need to locate and disconnect a

white connection plug. Pull the lever on this white

connection plug to disconnect from the wire har-

ness..

SB - G M -B U RB C N S L /1 0 W 3 v 2 , J L AU D IO, I n c 2 0 0 5 Sh e e t SK U # 0 1 1 1 6 7 3 /0 8 / 2 0 0 5Pag e 2

w w w . j l a u d i o . c o m

*WARNING*

If you have removed the front seats, you need to place

both front seats back into the vehicle and reconnect the

wires from . Do not secure the seats back toSTEP 6

the floor.

Reconnect the ground wire to the negative side of the

battery.

Follow next step (STEP 11) and then repeat procedure

to remove the front seats. (caution before STEP 6)

*CAUTION*

The vehicle that you are working on might be

equipped with side impact air bags.To remove the

front seats, please follow these required procedures.

1)Disconnect the ground wire from the negative

side of the battery.

2)Let the vehicle sit for 15 minutes.This allows the

air bags to discharge.

3)Now you can remove the front seats and discon-

nect the air bag wire.

If you are not comfortable with disconnecting the air

bag wires.This install can be accomplished by not

removing the front seats. It will be tight quarters.

*Trucks* If you remove the front seats, you will

have to place the seats back in and reconnect the

air bag wires.Then repeat the removal process, in

future steps. You might not want to remove the

seats till then.

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Ikke kategoriseret
Model:	Stealthbox SB-GM-BURBCNSL/10W3v3

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JL Audio Manualer

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Manual

30 December 2025

JL Audio Stealthbox SB-F-ESCP/10W1v3 Manual

30 December 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/BK Manual

8 December 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Manual

4 Oktober 2024

JL Audio MBT-RX Manual

3 Oktober 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

29 September 2024

JL Audio MBT-CRXv2 Manual

10 September 2024

JL Audio MBT-RXv2 Manual

4 September 2024

JL Audio MBT-CRXv3 Manual

4 September 2024

JL Audio Stealthbox SBX-F-MAVG1/10TW1 Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg CVI120GE Manual

17 Juni 2025

Panduit VS-CKP4-000 Manual

17 Juni 2025

Yamazen LTH-2BH Manual

17 Juni 2025

Philips ASH4511CH Manual

17 Juni 2025

Yamazen MNW-1890CJ Manual

17 Juni 2025

D-Link DMC-700SC Manual

17 Juni 2025

Makita DHP490 Manual

17 Juni 2025

Royal Catering RC-BFWH12030 Manual

17 Juni 2025

Makita TW011G Manual

17 Juni 2025

Philips 50BDL2050Q Manual

17 Juni 2025