JL Audio Stealthbox SB-POL-ACE/10TW1 Manual

JL Audio Ikke kategoriseret Stealthbox SB-POL-ACE/10TW1

Læs gratis den danske manual til JL Audio Stealthbox SB-POL-ACE/10TW1 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 28 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-POL-ACE/10TW1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Continued on Next Page

SB-POL-ACE/10TW1 INSTR_SKU# 011454

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULT Y:

ESTIMATED TIME:

1 HOUR

OUT

Enclosure Type: Sealed

Driver Type: 10TW1-4

Nominal Impedance: 2 ohms

Continuous Power Handling: 600 watts (RMS method)

I N S T A L L A T I O N G U I D E

for the

SB-POL-ACE/10TW1

SKU# 94628

2015 & Up Polaris Ace, Ace 570, & Ace 570 SP

I N C LUD E D H A R D W A R E

Continued on Next Page

Page 2 • JL Audio, Inc., 2016

SB-POL-ACE/10TW1 INSTR_SKU# 011454

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

* Pre-installed on enclosure

BOM ID Qty SKU Description

1 2 153714 1/4 - 20 x 1” Stainless Steel Button Head Screw

2 2 153716 1/4” Stainless Steel Split Lock Washer

3 2 153713 Stainless Steel Cushion Clamp

4 2 153717 M8 - 1.25 Nylon Lock Nut

5 2 153718 M8 - 1.25 x 40mm Flange Head Cap Screw

6* 2 153709 Rubber Bumper

7* 2 153715 #8 x 3/4” Phillips Pan Head Stainless Steel Screw

- 1 150249 Foam Strips (not shown)