JL Audio Stealthbox SB-T-FJ/12W1v3 Manual

JL Audio Ikke kategoriseret Stealthbox SB-T-FJ/12W1v3

Læs gratis den danske manual til JL Audio Stealthbox SB-T-FJ/12W1v3 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-T-FJ/12W1v3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

INSTALLATION

D I F F I C U L T Y :

I N S T A L L A T I O N G U I D E

for the

SB-T-FJ/12W1v3

SKU# 94310

2000 - 2014 Toyota FJ Cruiser

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-

specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation

professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle

properly. Also, keep in mind that your warranty coverage extends to 1 year if your system is installed or approved by your

authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove all contents from cargo area.

If your vehicle did not come equipped with the factory

“woofer” system, go to STEP 7.

Continued on Next Page

S T E P 2

Remove the access panel from under the factory

“woofer” system.

Disconnect the white plug.

S T E P 3

Remove the two mounting bolts that secure the bottom of

the factory “woofer” system.

SB-T-FJ/12W1v3_INSTR_SKU#011226

OUT

Continued on Next Page

SB-T-FJ/12W1v3_INSTR_SKU#011226

S T E P 7

Remove the factory “woofer” system or the pocket from the

vehicle.

Vehicles without the factory “woofer” system, remove the

access panel that is located on the wheel well.

S T E P 6

Remove the upper right mounting bolt.

S T E P 5

Remove the upper left mounting bolt.

S T E P 4

Loosen the four exposed screws and remove the grille panel.

L-BRACKET

8mm FLAT WASHER

STEALTHBOX WALL THREADED INSERT

8mm BOLT

SPACER

8mm LOCK WASHER

Page 2 • JL Audio, Inc 2016

S T E P 9

Place the Stealthbox onto passenger’s side rear wheel well.

Place a supplied 6mm lock washer and 6mm flat washer

onto each of the supplied 6mm x 40mm bolts.

From inside the Stealthbox®, place one of the bolt assemblies

through the left mounting hole that is located on the rear

wall of the Stealthbox®.

S T E P 1 1

Place the supplied pair of threaded studs into the 3 o’clock

and 9 o’clock position of the woofer’s mounting screw

locations. Leave about 1 1/2-inch exposed. As seen the

picture to the left.

Reconnect the speaker wires from inside the Stealthbox®

back onto the woofer’s terminal.

Place the woofer into the mounting hole, using the threaded

studs as guides. Mount the woofer using the mounting

screws that were removed in STEP 8. Remove the threaded

studs and secure the remaining pair of mounting screws.

S T E P 1 0

From inside the Stealthbox®, place the other bolt assembly

through the right mounting hole that is located on the rear

wall of the Stealthbox®.

Secure both bolt assemblies.

S T E P 8

With hand tools, unscrew the woofer’s mounting screws.

Disconnect the speaker wire from woofer and remove from

the woofer from the Stealthbox®.

Place a supplied 8mm lock washer, 8mm flat washer,

L-bracket and spacer onto each of the supplied 8mm bolts.

Place the shorter length leg of the L-bracket onto the

8mm bolt.

Secure each bolt assembly onto the bottom of the

Stealthbox®. The longer length leg of each L-bracket is to be

positioned toward the front of the Stealthbox®.

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Ikke kategoriseret
Model:	Stealthbox SB-T-FJ/12W1v3

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-T-FJ/12W1v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JL Audio Manualer

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Manual

30 December 2025

JL Audio Stealthbox SB-F-ESCP/10W1v3 Manual

30 December 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/BK Manual

8 December 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Manual

4 Oktober 2024

JL Audio MBT-RX Manual

3 Oktober 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

29 September 2024

JL Audio MBT-CRXv2 Manual

10 September 2024

JL Audio MBT-RXv2 Manual

4 September 2024

JL Audio MBT-CRXv3 Manual

4 September 2024

JL Audio Stealthbox SBX-F-MAVG1/10TW1 Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 303676 Manual

16 Juni 2025

Playtive IAN 307527 Manual

16 Juni 2025

Playtive IAN 327441 Manual

16 Juni 2025

Xblitz G750 Pro Manual

16 Juni 2025

Playtive IAN 285603 Manual

16 Juni 2025

Playtive HG05646 Manual

16 Juni 2025

Milwaukee M12 IR Manual

16 Juni 2025

Blodgett Invoq 202BG Manual

16 Juni 2025

Aiphone GT-AD Manual

16 Juni 2025

Playtive IAN 113608 Manual

16 Juni 2025