JL Audio Stealthbox SB-T-TACACCAB/10W3v3/DG Manual

JL Audio Ikke kategoriseret Stealthbox SB-T-TACACCAB/10W3v3/DG

Læs gratis den danske manual til JL Audio Stealthbox SB-T-TACACCAB/10W3v3/DG (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-T-TACACCAB/10W3v3/DG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

I N S T A L L A T I O N G U I D E

for the

SB-T-TACCAB/10W3v3

SKU# 94307 - 94308

2005 - 2015 Toyota Tacoma Access Cab

Thank you for choosing a JL Audio Stealthbox ® for your automotive sound system. With proper installation, your new

vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox ® installed by your authorized JL Audio dealer. The

installation professionals employed by your dealer have the necessary tools and experience to disassemble and

reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is

installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove the cup holders from the console.

Remove the pair of screws that are exposed.

Continued on Next Page

S T E P 2

Remove the pair of screws that are at the bottom of the

storage bucket.

Remove the console out of the truck.

S T E P 3

Remove the three bolts located on the transmission tunnel

that secures the mounting bracket for the AC power inverter.

(If equipped with the AC power inverter)

Unplug the wiring harness from the AC power inverter and

remove out of truck.

If the AC power is to kept, this is up to the installer for proper

relocation, JL Audio® is not responsible.

SB-T-TACCAB/10W3v3_INSTR_SKU#011230

INSTALLATION

D I F F I C U L T Y :

OUT

ESTIMATED TIME:

12 HOUR

Continued on Next Page

SB-T-TACCAB/10W3v3_INSTR_SKU#011230

S T E P 7

Measure and mark 1-inch from the rear panel’s edge to the

middle of the rear panel. The mark is on both sides and the

top.

Cut on the marked line and remove the center section.

S T E P 6

Run speaker wire form the amplifier’s location to the

Stealthbox®. Wire to the terminal and check the woofer for

proper operation.

Place the Stealthbox® into the mounting location.

Using the three factory bolts that where removed in

STEP 3, secure the bottom of each mounting bracket to the

transmission tunnel.

Tighten all six mounting bolt assemblies.

S T E P 5

Place a supplied lock washer, flat washer and mounting

bracket onto three of the supplied bolts.

The two shorter length brackets mount close to the woofer.

Make sure that all three mounting brackets tapper out from

the enclosure, not tapper in.

Only hand tighten the mounting assembly at this time.

S T E P 4

Cut off this portion of the bracket as close to the

transmission tunnel as possible.

Page 2 • JL Audio, Inc 2016

S T E P 9

*IMPORTANT*

This picture is looking inside the center console with the lid

open. The front of the console it to the left.

Measure and mark 2 inches from the top of the center

console down. Follow the lines in the picture.

S T E P 1 1

*IMPORTANT*

This picture is looking inside the center console with the lid

open. The picture is facing the front of the console.

Cut on the complete marked line. Do not cut into the outer

walls, these are not double layered. Only cut into the floor

and into the stand outs for the legs of the lid.

S T E P 1 0

*IMPORTANT*

This picture is looking inside the center console with the lid

open. The picture is facing the rear of the console.

Measure and mark 2 1/2 inches from the top of the center

console down. Follow the lines in the picture.

S T E P 8

Measure and mark 2 inches from the top of the

cup holders down. The mark goes all the way around the

cup holder section.

Cut on the marked line and remove the bottom of the

cup holders.

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Ikke kategoriseret
Model:	Stealthbox SB-T-TACACCAB/10W3v3/DG

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-T-TACACCAB/10W3v3/DG stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret JL Audio Manualer

JL Audio Stealthbox SBX-T-TCMAX3G/12TW3 Manual

10 Marts 2025

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-2 Manual

30 December 2025

JL Audio Stealthbox SB-F-ESCP/10W1v3 Manual

30 December 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/BK Manual

8 December 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Manual

4 Oktober 2024

JL Audio MBT-RX Manual

3 Oktober 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Manual

29 September 2024

JL Audio MBT-CRXv2 Manual

10 September 2024

JL Audio MBT-RXv2 Manual

4 September 2024

JL Audio MBT-CRXv3 Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta Adagio BV3101 Manual

12 August 2025

Klein Tools VDV826-705 Manual

12 August 2025

Walrus Audio Canvas Clock Manual

12 August 2025

Rowenta Artik Ionic VU9020 Manual

12 August 2025

Slingshot S (2024) Manual

12 August 2025

Discover D713U Manual

12 August 2025

Tefal Virtuo FV1712 Manual

12 August 2025

Mars Gaming MF-LINKFINITYKIT2R Manual

12 August 2025

Rowenta City Space Cyclonic RO2544 Manual

12 August 2025

Beverage-Air PRT2XTHC-1AS Manual

12 August 2025