Joy-It ARD-NanoV4-MC Manual

Joy-It Ikke kategoriseret ARD-NanoV4-MC

Læs gratis den danske manual til Joy-It ARD-NanoV4-MC (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Joy-It ARD-NanoV4-MC, eller vil du spørge andre brugere om produktet?

Side 1/6
NANO V4 MINICORE
ARD-NanoV4-MC
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
Dear customer,
thank you for purchasing our product. In the following we will show you
what you need to bear in mind when commissioning and using.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
The NanoV4-MC is a particularly small microcontroller and has been specially
developed for working with plug-in boards thanks to the pin header that leads
out at the bottom.
The integrated USB Type-C interface can be used to supply the circuit and board
with power and to transfer programs to the microcontroller.
Compared to the NANO-V3, the NanoV4-MC has 2 additional IO pins and an
additional hardware I2C and SPI interface in addition to the USB-C interface.
The bootloader used is compatible with most existing Arduino libraries.
1. GENERAL INFORMATION


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: ARD-NanoV4-MC

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It ARD-NanoV4-MC stil et spørgsmål nedenfor, og andre brugere vil svare dig