Joy-It RB-LCD-20x4 Manual


Læs gratis den danske manual til Joy-It RB-LCD-20x4 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 57 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 29 anmeldelser. Har du et spørgsmål om Joy-It RB-LCD-20x4, eller vil du spørge andre brugere om produktet?

Side 1/5
16X2 AND 20X4 LCD DISPLAY
RB-LCD 16x2 and RB LCD- - -20x4
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
This manual is suitable for the RB LCD 16x2 and the RB LCD 20x4, becau-- - - -
se both LCDs are controlled by the IO Expander PCF8574.-
2. CONNECTION
Your LCD is connected by plugging it onto the GPIO strip of your Raspber-
ry Pi. This should look like this.
The buttons are connected to the GPIOs of the Raspberry Pi. The back-
light is permanently activated on this display and cannot be switched o.
Button Raspberry Pi
S1 GPIO 4
S2 GPIO 16
S3 GPIO 10
S4 GPIO 9
The display can be accessed under the I2C address 0x27.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: RB-LCD-20x4

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-LCD-20x4 stil et spørgsmål nedenfor, og andre brugere vil svare dig