Joy-It RB-LEDMatrix Manual

Joy-It Ikke kategoriseret RB-LEDMatrix

Læs gratis den danske manual til Joy-It RB-LEDMatrix (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Joy-It RB-LEDMatrix, eller vil du spørge andre brugere om produktet?

Side 1/5
RB-LEDMatrix
Expansion board with 2 LED matrices for Raspberry PI
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
2. USE WITH THE RASPBERRY PI
2.1 Installing the soware
If you are already using a current Raspberry Pi OS on your Raspberry Pi, you can skip this step and
continue immediately with step 2.2.
Install on your SD card using the program the current Raspbian Image, which you Win32 Disk Imager-
can download under the following .link
2.2 Connecting the module
Place the module on pins 1 to 26 of your Raspberry Pi as shown in the following picture. Note that the
module is placed with the overhang facing the Raspberry Pi.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: RB-LEDMatrix

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-LEDMatrix stil et spørgsmål nedenfor, og andre brugere vil svare dig