Joy-It RB-TFT3.5 Manual

Joy-It Skærm RB-TFT3.5

Læs gratis den danske manual til Joy-It RB-TFT3.5 (10 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Joy-It RB-TFT3.5, eller vil du spørge andre brugere om produktet?

Side 1/10
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3.2" / 3.5" TOUCH DISPLAY-
For the pinning onto the Raspberry Pi
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. OVERVIEW
3.2" Display 3.5" Display
Controller XPT2046
Resolution 320 x 240 480 x 320
Colors 65.536
3. CONNECTION
Put the 3.2" / 3.5" TFT Display on the Raspberry Pi so that the first 26 -
pins of the GPIO pin header are plugged in. Aer that, the
backgroundlight of the display is turned on.
4. INSTALLATION OF THE SOFTWARE
Install the TFT image on your SD card with a program like the - - Win32-
Disk Imager-. You can download the images via the following links:
For the 3.2" display, you find the downloads .
here
For the 3.5" display, you find the downloads .
here


Produkt Specifikationer

Mærke: Joy-It
Kategori: Skærm
Model: RB-TFT3.5

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-TFT3.5 stil et spørgsmål nedenfor, og andre brugere vil svare dig