JUNG 1202URE Manual

JUNG Skifte 1202URE

Læs gratis den danske manual til JUNG 1202URE (6 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om JUNG 1202URE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Relay switch insert 2-channel

Light Management

Relay switch insert 2-channel

Art.-No.: 1202 URE

Operationsmanual

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Danger of electric shock. Always disconnect before carrying out work on the devise or

load. At the same time, take into account all circuit breakers that supply dangerous

voltage to the device or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

Danger of electric shock on the SELV/PELV installation. Not suitable for switching SELV/

PELV voltages.

Danger of electric shock. Do not operate the insert without a cover.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

picture 1

(1) Flush-mounted insert

(2) Frame

(3) Pushbutton cover

(4) Adjuster for run-on time of output HLK

(5) Connection terminals for mains voltage and output Kanal 1

(6) Connection terminals for output for HVAC HLK

3 Function

Intended use

- Output for switching light Kanal 1

- Output for switching light, fans, air conditioners, thermostats and motors HLK

1/6

32541323

J:0082541323 30.07.2010

- Operation with suitable cover

- Installation in appliance box to DIN 49073 acc.

Product characteristics

- Output with potential-free NO contact for switching a second electric circuit, not SELV HLK

or PELV

- Switch-on delay of output can be switched off HLK

- Run-on time of output adjustable HLK

- Connection of extensions possible

Function with motion detector or presence detector cover

Output Kanal 1

- Output is switched on if motions are detected and the brightness is below the threshold set

on the cover.

- Output remains switched on as long as motions are detected.

- Output is switched off if no more motions are detected and the run-on time set on the cover

has elapsed.

Output HLK

- Switch-on delay switched on: output is switched on independently of the brightness after

3 minutes if additional motions are detected approx. 2.5 to 3 minutes after the initial

detection.

- Switch-on delay switched off: output is switched on independently of brightness if motion is

detected.

- Output remains switched on as long as motions are detected.

- Output is switched off if no more motions are detected and the run-on time set on the insert

has elapsed.

Behaviour after a mains voltage failure

- Less than 0.2 seconds: switching state is retained

- longer than 0.2 seconds: both channels switch off. The behaviour after mains voltage

return depends on the cover used (see instructions for the cover).

4 Operation

Switching on with pushbutton cover (see Accessories)

Operation on the main device, 2-wire extension or on the installation button is identical.

i Extension operation is only possible if there is a cover fitted on the main device.

Outputs are switched off.

o Press the button.

Output switches on. Kanal 1

When the switch-on delay for output is switched off, output switches on directly. HLK HLK

When the switch-on delay for output is switched on, output switches on with a HLK HLK

time delay, if output is switched on for longer than 3 minutes. Kanal 1

Switching off with pushbutton cover (see Accessories)

Outputs are switched on.

o Press the button.

Output switches off. Kanal 1

Output switches off after the run-on time set on the insert elapses. The run-on time HLK

begins as soon as output has switched off. Kanal 1

Switching on in combination with motion detector or presence detector

Operation is performed with a 2-wire extension or an installation button. Only an overview of the

behaviour is provided here. For additional information, please refer to the instructions for the

cover in question. Operation with an extension is only possible is there is a cover fitted on the

main device.

Outputs are switched off.

2/6

32541323

J:0082541323 30.07.2010

Light Management

Relay switch insert 2-channel

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Skifte
Model:	1202URE

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG 1202URE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte JUNG Manualer

JUNG W8180 Manual

10 December 2024

JUNG 201TE Manual

10 December 2024

JUNG ASLS1280-1 Manual

20 September 2024

JUNG ME5201DTU Manual

2 September 2024

JUNG SL1180 Manual

28 August 2024

JUNG AS5544.03VWW Manual

28 August 2024

JUNG ES5201DTU Manual

28 August 2024

JUNG SL1180-1 Manual

28 August 2024

JUNG CD5024WW Manual

28 August 2024

JUNG A1180-1 Manual

23 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025