JUNG 4193 TSM Manual

JUNG Smart hjem 4193 TSM

Læs gratis den danske manual til JUNG 4193 TSM (5 sider) i kategorien Smart hjem. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 17 anmeldelser. Har du et spørgsmål om JUNG 4193 TSM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Universal push-button module

Universal push-button module, 1-gang

Art. No. : 4191 TSM

Universal push-button module, 2-gang

Art. No. : 4192 TSM

Universal push-button module, 3-gang

Art. No. : 4193 TSM

Universal push-button module, 4-gang

Art. No. : 4194 TSM

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise

safe operation cannot be ensured. Electrostatic discharges can cause defects in the

device.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed

technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.

The function of this device depends upon the software. Detailed information on loadable

software and attainable functionality as well as the software itself can be obtained from the

manufacturer´s product database. Planning, installation and commissioning of the device are

carried out with the aid of KNX-certified software. The latest versions of product database and

the technical descriptions are available on our website.

Intended use

- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,

temperatures, calling up and saving light scenes, etc.

- Installation in appliance box according to DIN 49073

Product characteristics

- The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling

up moods, etc.

- Measurement of the room temperature

- Completion with keyset

- Two red status LEDs for each button

- A blue operation LED as an orientation light and to indicate the programming status

- Integrated bus coupling unit

- One, two or three functions per button

- Push-button function or rockers function, vertical or horizontal

- Connection of push-button extension module to expand the universal push-button sensor

module to include four additional buttons

3 Operation

Operating a function or load

Depending on the programming, a button can have up to three functions assigned to it –

upper/left, lower/right, entire surface. Operation depends on the specific function.

oSwitch: Short press on button.

oDim: Long press on button. The dimming process ends when the button is released.

oMove Venetian blind: Long press on button.

1/5

32566733

j0082566733 23.03.2016

oStop or adjust Venetian blind: Short press on button.

oCall up light scene: Short press on button.

oSave light scene: Long press on button.

oSet value, e.g. brightness or temperature setpoint: Short press on button.

4 Information for electrically skilled persons

4.1 Fitting and electrical connection

DANGER!

Electrical shock on contact with live parts in the installation environment.

Electrical shocks can be fatal.

Before working on the device, disconnect the power supply and cover up live

parts in the working environment.

Snapping on the adapter frame

oWith the adapter frame (3) in the correct orientation, snap it from the front onto the

pushbutton module (4) (figure 1). Note marking .TOP

Fitting and connecting the device

Figure 1: Mounting the push-button module

(1) Supporting frame

(2) Design frame

(3) Adapter frame

(4) Push-button module

(5) Fastening screws

(6) Buttons

(7) KNX connection terminal

(8) Box screws

Supporting frame side for A design ranges, CD design ranges and FD design. SupportingA

frame side for LS design ranges.B

When the push-button expansion module is used (figure 2): Preferably mounted vertically. Use

large supporting frame (14). When mounting on only one flush-mounted box, countersink the

lower screws into the wall, e.g. with a ø 6 x10 mm hole. Use supporting frame as template.

2/5

32566733

j0082566733 23.03.2016

Universal push-button module

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Smart hjem
Model:	4193 TSM

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG 4193 TSM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Smart hjem JUNG Manualer

JUNG A 5192 KRM TS D Manual

20 September 2024

JUNG 4193 TSM Manual

30 August 2024

JUNG FM US 2 UP Manual

24 Juli 2024

JUNG FM HS 1 T Manual

21 Juli 2024

JUNG A 5194 KRM TS D Manual

28 Juni 2023

JUNG 4192 TSM Manual

1 December 2022

JUNG 2336 REG HZR HE Manual

23 November 2022

JUNG FM UD 20250 UP Manual

20 November 2022

JUNG FM AS 10 UP Manual

11 Oktober 2022

Smart hjem Manualer

Nyeste Smart hjem Manualer

Eltako FR62-230V Manual

1 August 2025

Eltako FSUD-230 Manual

1 August 2025

1 August 2025

31 Juli 2025

31 Juli 2025

31 Juli 2025

Tripp Lite Protect It! TLP808TELTAA Manual

31 Juli 2025

X-Sense Pro SAL51 Manual

31 Juli 2025

Acer Connect M3 Manual

30 Juli 2025

Tesla TSL-GW-GT03ZG Manual

30 Juli 2025