JUNG TRAL231 Manual

JUNG Termostat TRAL231

Læs gratis den danske manual til JUNG TRAL231 (4 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om JUNG TRAL231, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Room temperature controller

26.06.20201 / 50024091005

Room temperature controller

Ref.-no.: TR .. 231 ..

TR .. 241 ..

TR .. 236 ..

TR .. 246 ..

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, re or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or load.

A relative air humidity of max. 95% may not be exceeded. Avoid any moisture condensation.

These instructions are an integral part of the product, and must remain with the end customer.

2 Structure of the device

Fig. 1: Geräteaufbau

(1) Insert

(2) Frame

(3) Cover

(4) Rocker

(5) Screw

(6) Setting knob

3 Function

Intended purpose

The room temperature controller is used to regulate the temperature in closed rooms such as ats, schools, function

suites, workshops, etc.

Product characteristics

Neutral conductor required

TR 231 U / TR 241 U:

- Separate terminal for temperature reduction of 5 K (e.g. during night time)

- ON/OFF switch with status LED

- When set temperature is reached the contact opens up.

TR 236 U / TR 246 U:

- No OFF-position

- Without switch and control LED

- When set temperature is reached the NO/NC contact switches over.

Room temperature controller

26.06.20203 / 50024091005

Fig. 4: TR 236 U

Fig. 5: TR 246 U

• Carry out the electrical connection according to the respective wiring diagram.

iEnsure that the neutral conductor N is connected to terminal N. Considerable uctuations in temperature may

otherwise occur.

Conductor cross-section: 1 to 2.5 mm² solid conductor

Symbols used in the wiring diagram

L = L conductor

N = N-conductor

AC1 = 24 V power supply

AC2

= Connection for clock signal to reduce temperature

= Heating

= Cooling

RF = Resistor for thermal feedback

TA = Resistor for night reduction of room temperature

Installation

• Mount room temperature controller in a switch box in accordance with DIN 49073.

Mounting height: approx. 1.5 m above the oor

• Clip the rocker (4) on the switch in the ush insert. (g. 1)

• Place the center plate together with the frame on the ush insert. The center plate must snap in place in the top

left of the housing base.

• Tighten the screw (5). (g. 1)

• Clip on the setting knob (6). (g. 1)

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Termostat
Model:	TRAL231

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG TRAL231 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat JUNG Manualer

JUNG TRDCD231 Manual

1 Oktober 2024

JUNG TRDLS-DISPWW Manual

28 August 2024

JUNG TRDA523048WW Manual

28 August 2024

25 August 2024

25 August 2024

24 August 2024

16 August 2024

16 August 2024

9 August 2024

9 August 2024

Termostat Manualer

Nyeste Termostat Manualer

MKC MK-725 Manual

18 Juni 2025

Tado Bridge X Manual

16 Juni 2025

Carrier ComfortVu Manual

16 Juni 2025

Mainstreet Equipment GMC-12 Manual

15 Juni 2025

Honeywell RTH21B Manual

14 Juni 2025

Tado Wireless Temperature Sensor X Manual

9 Juni 2025

Fantini Cosmi CH123E Manual

26 Marts 2025

Netatmo Smart Radiator Valve Manual

26 Februar 2025

Netatmo Smart Thermostat Manual

26 Februar 2025

Rose LM TER-9 Manual

5 Februar 2025