K&K Sound Banjo Twin Manual


Læs gratis den danske manual til K&K Sound Banjo Twin (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 6 anmeldelser. Har du et spørgsmål om K&K Sound Banjo Twin, eller vil du spørge andre brugere om produktet?

Side 1/2
92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | www.kksound.com
PRODUCT MANUAL
BANJO TWIN
The Banjo Twin does not require any alteration to your instrument; all the components are installed with
special double-sided tape. These will not harm the finish of your instrument and residues can easily be
removed with WD40.
The Banjo Twin works well in passive mode; if a preamp should be necessary we recommend our Pure
Preamp.
Please install the system as shown in the photos, using the supplied double-sided tape for the pickups. See the
photo below for the orientation of the pickups and the exact distance from the bridge feet it is different on
either side! Secure the two pickup cables on the rod with the supplied cable tie.
We recommend you only apply double-sided tape to the two outer edges of the pickups. We call this the
catamaran” mounting technique because the center portion of the pickup is free floating. This enhances
response while reducing the adhesive surface by about 40%.


Produkt Specifikationer

Mærke: K&K Sound
Kategori: Ikke kategoriseret
Model: Banjo Twin

Har du brug for hjælp?

Hvis du har brug for hjælp til K&K Sound Banjo Twin stil et spørgsmål nedenfor, og andre brugere vil svare dig